Kuppersberg GS 6057 [66/120] Filter assembly

Kuppersberg GS 6057 [66/120] Filter assembly
66
TECHNICAL PASSPORT ENGLISH
Dishwasher
2
1
3
21
3
Step 1: contrarotate the
Coarse lter ,and then lift it up
Step 2: lift the Flat lter up
NOTE: If operate from step 1 to step 2,
the lter system will be removed; while
operate from step 2 to step 1, the lter
system will be installed
Filter assembly
For best performance and results,
the lter assembly must be cleaned. The
lter efciently removes food particles
from the wash water, allowing it to be
recirculated during the cycle. For this
reason, it is a good idea to remove the
larger food particles trapped in the
lter after each wash cycle by rinsing
the semicircular lter and cup under
running water. To remove the lter
assembly, pull on the cup handle in
the upward direction. The entire lter
assembly should be cleaned once a
week. To clean the coarse lter and the
micro lter, use a cleaning brush. Then,
reassemble the lter parts as shown in
the gures above and reinsert the entire
assembly in the dishwasher, positioning
in its seat and pressing downward. The
dishwasher must never be used without
the lters. Improper replacement of the
lter may reduce the performance level
of the appliance and damage dishes
and utensils.
WARNING!
Never run the dishwasher without
the lters in place. When cleaning the
lters, don’t knock on them.
Otherwise, the lters could be
contorted and the performance of
dishwasher could be debased.

Содержание

Похожие устройства