Roborock Q7+ RU Black [41/48] App features

Roborock Q7+ RU Black [41/48] App features
41
Notes:
The robot will not go to sleep when it is charging.
The robot will automatically shut down if left in sleep mode
for more than 12 hours.
Charging
After cleaning, the robot will automatically
return to the dock to charge.
In pause mode, press the
button to
send the robot back to the dock. The power
indicator will pulse as the robot charges.
Note: If the robot fails to nd the dock, it will automatically
return to its starting location. Place the robot on the dock
manually to recharge.
Note: After resetting is complete, WiFi and other settings will
be restored to factory defaults.
Note: After spot cleaning, the robot will automatically return
to the starting point and enter Standby mode.
Error
If an error occurs while the robot is cleaning,
the power indicator will ash red and a voice
alert will sound. See “Errors” for solutions.
SpotCleaning
Press and hold the button to start spot
cleaning. Cleaning range: The robot cleans
a 1.5 m (4.9 ft) x 1.5 m (4.9 ft) square area
centered on itself.
Resetting
If the robot does not respond when a
button is pressed or cannot be turned o,
reset the system. Press the Reset button,
and the robot will reset automatically.
RestoringFactorySettings
Notes:
The robot will go to sleep automatically if left in an Error
state for over 10 minutes.
Placing the robot on the dock in an Error state will stop the
current cleanup.
If the robot does not function properly after
a system reset, switch it on. Press and hold
the
button and at the same time press
Reset button until you hear the “Restoring
factory settings” voice prompt. The robot
will then be restored to factory settings.
AppFeatures
Cleaning Map
Multi-Map Management
Real-Time Vacuum and Mop Route
Map Zoning
Map Editing
Custom Cleaning Modes
Scheduled Cleaning
Selective Room Cleaning
Zone Cleaning
No-Go-Zone & Invisible Wall
Custom Modes
Carpet Boost
Cleaning Mode Switch
4-Level Suction Power
Robot Information
Cleaning History
Battery Level
Care & Maintenance
More Features
Firmware Upgrade
Volume Adjustment
DND Mode
Voice Assistance Support
Note: Features and details of the app may vary slightly due to
the continuous app development and updates.
RellingtheWaterTankor
WashingMopCloth
To add water or clean the mop cloth,
press any button to stop the robot and
removethe mopping module. After adding
water or cleaning the mop cloth, reinstall
the mopping module and press the
button to continue.
DNDMode
The default Do Not Disturb (DND) period is
from 22:00 to 08:00. You can use the app to
disable the DND mode or modify the DND
period. When DND mode is activated, the
robot will not automatically resume cleanup,
the power indicator light will dim, and the
volume of the voice prompts will lower.
will go to sleep, and the power indicator will
ash every few seconds. Press any button to
wake it up.

Содержание

Похожие устройства

Скачать