Roborock Q7 Max RU White [34/36] Dustbinandwatertank combounit

Roborock Q7 Max RU White [34/36] Dustbinandwatertank combounit
34
Custom Cleaning Modes
Scheduled
Selective Room
Zone
No-Go Zones & Invisible Wall
Custom
Carpet Boost
Cleaning Mode Switch
Suction Power Levels
Mop Intensity Levels
Robot Information
Cleaning History
Battery Level
Care & Maintenance
More Features
Firmware Update
Volume Adjustment
Language Selection
Do Not Disturb mode
Voice Assistant Support
Functions and details of the app may vary slightly
due to the continuous app development and updates.
Note:
Routine Maintenance
C
C1
MainBrush
*
Clean every 2 weeks and replace every 6-12 months
C1-1—Main Brush Cover
C1-2—Latches
C1-3—Main Brush
C5-6—Allow 24 hours for the lter to dry
thoroughly and reinstall it.
The omni-directional wheel bracket cannot be removed.Note:
C3-2—Rinse the wheel and the axle with
water to remove any hair and dirt.
Dry and reattach the wheel, pressing
it rmly in place.
C3-1—Use a tool, such as a small screwdriver,
to pry out the axle and take out the
wheel.
Clean the main wheels with a soft, dry cloth.
C4
MainWheels
*
Clean monthly
C5-2—Remove the lter then empty the dustbin.
C5-1—Open the upper cover of the robot
and take out the unit.
C5
DustbinandWaterTank
ComboUnit
*
Clean weekly and replace the lter every 6-12 months
C5-3—Empty the water tank of unused water.
C5-4—Fill the dustbin with clean water and
gently shake it. Then pour out the
dirty water.
C5-5—Rinse the lter repeatedly and tap it
to remove as much dirt as possible.
To prevent blockage, only use clean water without
any cleaning liquid.
Note:
Do not touch the surface of the lter with your
hands, brush, or hard objects to avoid potential damage.
Note:
C3
Omni-DirectionalWheel
*
Clean as required
C2
SideBrush
1. Unscrew the side brush screw.
2. Remove and clean the side brush.
Reinstall the brush and tighten the screw.
*
Clean monthly and replace every 3-6 months
C1-8—Rotate the main brush caps in the
indicated unlock direction to remove
the caps.
C1-9—Remove any hair or dirt entangled
around the main brush, reinstall the
main brush and re-insert the brush
cover, making sure to place the tabs
in the slots.
C1-10—Make sure that the main brush
cover has been properly attached.
When properly installed, all four tabs
should be hidden.
Notes:
Main brush should be wiped down with wet cloth and
left to dry away from direct sunlight.
Do not use corrosive cleaning fluids or disinfectants to
clean the main brush.
C1-6—Turn over the robot and press the
latches to remove the main brush cover.
C1-7—Pull out the main brush and remove
the main brush bearing.
C1-4—Main Brush Caps
C1-5—Main Brush Bearing

Содержание

Похожие устройства

Скачать