Dreame H12 Pro [17/192] Cleaning the brush assembly

1313

Care & Maintenance

Cleaning the Tube and the Dirt Sensor

Remove the Used Water Tank, gently wipe the tube

and the dirt sensor with a wet cloth before use.

Cleaning the Brush Assembly

1.First, press the brush roller cover

release buttons inwards on both sides to

remove the brush roller cover. Press the

brush roller release button, and the brush

roller handle will pop out. Pull it to take

out the brush roller.

2. Clear the hair and debris tangled on the

brush roller with the provided cleaning

brush. Rinse the brush roller with clean

water. Air dry the brush roller thoroughly,

or dry it by activating the drying mode

several times.

3. Wipe the suction inlet with a dry cloth

or wet tissue. Do not rinse the brush

assembly with water.

4. Re-install the brush roller and the

brush roller cover until you hear a click.

Dirt Sensor

Note:

• Clean as needed. Alternating use of the two provided brush rollers is recommended.

• Replacing the brush roller every 3 to 6 months is recommended.