Panasonic EW1611 [10/48] After use

Panasonic EW1611 [10/48] After use
10
English
After use
1. Open the water tank cap, remove
the water tank, and throw away
the remaining water.
While removing the water tank,
press the main unit by hand.
Change the water every time
you use the irrigator.
Remove the dirt inside the water
tank with a sponge brush etc.
The water tank can be washed in a
dish washer.
The water tank cap cannot be
cleaned in a dish washer.
2. Install the water tank, and turn on
the power switch ”.
3. With the nozzle facing the basin,
set the Stop/Jet switch to
(Jet mode) to remove the remaining
water from the main unit.
Stop/Jet switch
4. When there is no water coming
out, set the Stop/Jet switch to
” (Stop), and turn off the power
switch “ ”.
5. Disconnect the power plug from
the household outlet.
6. Push the release button on
the body to release nozzle
off, then wash it. Keep the
nozzle.
The nozzle stand cannot be
cleaned in a dish washer.
Nozzle
release
button
7. Clean the handle, and put it back
into the main unit.
When cleaning the nozzle and handle
Do not use lukewarm water exceeding 50 °C.
Use neutral kitchen detergent and rinse well with
water to ensure no detergent remains after cleaning.
Wipe away the water with a towel or the like,
keep the product in the dry place.
The nozzle cannot be cleaned in a dish washer.
When wiping stains away from the main
unit with a cloth that has been soaked
in soap water and then wrung out
Never use thinners, benzine, or alcohol.
(Doing so may cause malfunction,
cracking or discoloration of the parts.)
Do not wash the main unit with water.
Use cotton swabs to clean any part that
is inaccessible to the cloth.
When the identication ring is coming
off, as shown in the right gure, align
the nozzle with any direction of the
identication ring to install it
Even if the identication ring is not attached, it
does not affect the performance of the nozzle.
PB016872 - EW1611 �������_(01EN)_08-10-18.indd 10 2018/8/10 10:27:13

Содержание

Похожие устройства

Скачать