Panasonic EW1611 [8/48] Select the water pressure level

Panasonic EW1611 [8/48] Select the water pressure level
8
English
How to use
On sink
1
Place the main unit on a at and stable
surface.
2
Plug in the power plug.
The power cord can be
pulled out from either the
right or the left.
1. Open the water tank cap, remove
the water tank, and ll it with water.
Always use new tap water or lukewarm
water.
If water is cold, use lukewarm water with
temperature 40 °C or below.
When lling water, be sure not to exceed
the upper water level limit.
Upper water
level limit
2. Set the tank to the main unit rmly,
and attach the water tank cap.
3. Insert the nozzle rmly into the
handle until it clicks. Make sure it
is xed rmly.
If the nozzle is hard to install, immerse
the nozzle insertion part in water.
4. Select the water pressure level.
Ensure the Stop/Jet switch is set
to “
” (Stop)
1
Press the power switch “
”.
(The water pressure level
LED indicator lights on.)
The power will be cut off
after about 10 minutes to
avoid forgetting to turn off.
(This function is to avoid
forgetting cutoff.)
2
With the nozzle facing the
basin, set the Stop/Jet
switch to “
” (Jet mode)
to jet water.
Stop/Jet switch
3
Press “+” or “-” on the water
pressure regulator switch until
the desired ow intensity is
reached.
Keep pressing “+” or “-” will
continuously change the
water pressure.
Level 10
Level 2
Level 1
4
Set the Stop/Jet switch to “
” (Stop) to stop jetting
temporarily.
Do not leave the product in the ” (Stop) state for more
than 1 minute. (May cause malfunction.)
PB016872 - EW1611 �������_(01EN)_08-10-18.indd 8 2018/8/10 10:27:11

Содержание

Похожие устройства

Скачать