Monsher MD 4501 [68/148] English

Русский

English

STEP 4. Dishwasher installation steps

Please refer to the specified installation steps in the installation

drawings.

1. Affix the condensation strip under the work surface of cabinet. Please ensure

the condensation strip is flush with edge of work surface. (Step 2)

2. Connect the inlet hose to the cold water supply.

3. Connect the drain hose.

4. Connect the power cord.

5. Place the dishwasher into position. (Step 4)

6. Level the dishwasher. The rear food can be adjusted from the front of the

dishwasher by turning the Philips screw in the middle of the base of dishwasher use

an Philips screw. To adjust the front feet, use a flat screw driver and turn the front

feet until the dishwasher is level. (Step 5 to Step 6)

7. Install the furniture door to the outer door of the dishwasher. (Step 7 to Step 10)

8. Adjust the tension of the door springs by using an Allen key turning in a

clockwise motion to tighten the left and right door springs. Failure to do this could

cause damage to your dishwasher. (Step 11)

9. The dishwasher must be secured in place. There are two ways to do this:

A. Normal work surface: Put the installation hook into the slot of the side plane

and secure it to the work surface with the wood screws.

B. Marble or granite work top: Fix the side with Screw.