Monsher MD 4501 [87/148] English

Русский 87

English

STARTING A CYCLE WASH

1. Draw out the lower and upper basket, load the dishes and push them back.

It is commended to load the lower basket first, then the upper one.

2. Pour in the detergent.

3. Insert the plug into the socket. The power supply refer to last page”Product

fiche”.

Make sure that the water supply is turned on to full pressure.

4. Open the door, touch the Power button, and the On/Off light will turn on.

5. Choose a program, the response light will turn on. Then close the door, the

dishwasher will start its cycle.

CHANGING THE PROGRAM MID-CYCLE

A wash cycle can only be changed if it has been running for a short time

otherwise, the detergent may have already been released and the dishwasher may

have already drained the wash water. If this is the case, the dishwasher needs to

be reset and the detergent dispenser must be refilled. To reset the dishwasher,

follow the instructions below:

1. Open the door a little to stop the dishwasher, after the spray arm stop working,

you can open the door completely.

2. Press Program button more than three seconds the machine will be in stand

by state.

3. You can change the program to the desired cycle setting.

3 sec