Kuppersberg HFT 610 B черный [54/140] Fixing the appliance figure 6

Kuppersberg HFT 610 B черный [54/140] Fixing the appliance figure 6
54
TECHNICAL PASSPORT ENGLISH
Built-in Electric Oven
 Fix the appliance with the screws
provided along with it.
 Screw the appliance into the
holes, which are shown in gure 6.
 Make sure that the oven is xed.
Otherwise, there is a risk of tilting dur-
ing use.
Last Checks
 Turn on the electricity after per-
forming the installation.
 Read the user manual for using
the appliance.
Removing The Appliance
 Turn off the electricity.
 Remove the xing screws.
 Lift the appliance together with
at least two people by pulling it out.
Future Carrying Procedures
While carrying the appliance in the
future;
 Retain the original box of the ap-
pliance. In case there is no original box,
tape and wrap it with a bubble packag-
ing or a thick cardboard tightly.
 If there is an accessory in it,
place a cardboard in the size of the
oven door so the oven door is not dam-
aged. Tape the door to prevent it from
opening.
WARNING. Do not lift the oven by
holding its handle or door.
WARNING. Do not place an item
on the product, carry it uprightly.
sions mentioned in gure 2 for neces-
sary ventilation.
Installing Into A Tall Cabinet
(Figure 3)
 The cabinet should be in compli-
ance with the dimensions mentioned in
gure 3.
 You need to unload the rear com-
partment of the cabinet in the dimen-
sions mentioned in the gure for neces-
sary ventilation.
 Moreover, if there is a back panel
in the tall cabinet, it should also be re-
moved.
Ventilation (Figure 4)
In order for you to get better ef-
ciency from your oven, there should be
adequate cold air intake. Leave suitable
spaces according to the dimensions
mentioned in Figure 4.
Installing On The Corner
(Figure 5)
 The installation should be in
compliance with the specied dimen-
sions to perform the installation men-
tioned in Figure 5 and to be able to
open the appliance door.
Fixing The Appliance (Figure 6)
 Center the appliance and push it
completely into the furniture.
 Power cable should not be bent
under the oven and between the oven
and the furniture.
 Open the appliance door.

Содержание

Похожие устройства

Скачать