Centek CT-1747 Инструкция по эксплуатации онлайн [20/24] 810060

19

deactivation the temperature in the freezing chamber will automatically

return to the value set before superfreezing mode activation.

NOTE: we recommend setting the temperature in the cooling chamber to 4 °С and

in the freezing chamber to -18 °С.

WEEKEND MODE

Unlock the refrigerator, then simultaneously press and hold the «0» button and

the lock button (11) for 4 seconds to switch to the weekend mode. Press any

button to cancel the weekend mode.

change. The compressor starts up automatically after a certain time.

POWER FAILURE HANDLING

In case of a power failure the current operating condition and settings will be

memorized and restored when power supply resumes.

ERROR INDICATION

The following warnings appearing on the display denote the corresponding

malfunctions of the refrigerator. Notwithstanding that the refrigerator may still

retain the refrigerated storage function while the following error codes are

displayed, the user should contact a service technician for maintenance, in order

to ensure proper operation of the appliance.

The door seal gets dirty easily and needs to be washed more often.

If you do not use the refrigerator for a long time, remove the plug from the socket,

defrost, wash and dry the refrigerator.

8. TROUBLESHOOTING TABLE

In case of improper operation or a malfunction, please study the following section before contacting an authorized service center. In some cases you may be able to

solve the problem yourselves.

Problem Probable Causes

The appliance is not working

• Ensure that the power cable is properly connected to the electric socket.

• The ambient temperature is too low. Try to set a lower (colder) temperature.

• air circulation noise caused by the small fan in the freezing chamber or by other refrigerator components;

• bubbling noise similar to that of boiling water;

• crackling noises during automatic defrosting;

• clicking noise before compressor startup.

Motor operates continuously

The noise of the operating motor is normal in the following cases:

• the temperature is set too low;

• a large quantity of warm food has recently been placed in the refrigerator;

• ambient temperature too high;

• the door has been open for a long time or opened too often;

Set a higher temperature on the control panel.

The door is hard to close

Check the installation gradient of the refrigerator. The front edge of the refrigerator should be higher than the back edge

by max. 10 to 15mm to provide sufficient gravity for door closing.

Internal illumination not working

• LED lamp damaged. Replace the bulb.

• The light has been turned off by the control system since the door has been open for a long time. Close the door and

open it again to re-activate the function.