Centek CT-1957 Инструкция по эксплуатации онлайн [46/52] 810069

Centek CT-1957 Инструкция по эксплуатации онлайн [46/52] 810069
45
MY TIME
You can select a custom time for program duration.
Select the desired program, then (before starting it) select the desired washing
duration by repeatedly pressing the «MyTime» button.
The internal sub-cycles of the selected program will be proportionally adapt
to the new time.
SMART MODE
If you are tired, in a hurry or simply don’t like to figure out the right washing
parameters, the machine can do it all by itself.
In the SMART mode the washing machine evaluates the parameters of the loaded
laundry and automatically selects the duration, temperature (usually within a 20
to 40 °С range), number of rinsing sub-cycles, etc.
This mode van be easily started in one of the following ways:
1. With the machine turned off by holding down the SMART button for 3 seconds.
2. With the machine turned on – either as described under Item 1, or by pressing
the SMART button once and then pressing the «Start/Pause» button.
NOTE: the SMART mode is designed for washing laundry made of cotton, linen,
synthetic or mixed fabrics, with a mild degree of contamination, worn every day.
For heavy or unusual contamination, or for laundry requiring special care, please
use the specialized programs.
CHANGING SETTINGS DURING PROGRAM EXECUTION
Even when the washing has been already started you can still adjust its settings.
For this purpose put the currently running program on hold by pressing the
«Start/Pause» button. Change the settings or add/or auxiliary functions.
If the current stage of the washing cycle allows making the selected changes,
they will be implemented.
Resume machine operation by pressing the «Start/Pause» button.
LAUNDRY TOP
-
UP
To load additional clothes into the machine, put it on hold by pressing the «Start/
Pause» button. If the water level allows this and the temperature inside is not too
high, the door will unlocked (the relevant indicator will disappear).
Open the door, add clothes into the drum (do not exceed the maximum batch
weight).
Close the door and resume machine operation by pressing the «Start/Pause»
button.
INTERRUPTING THE CURRENT PROGRAM
You may need to prematurely abort the machine operation. If the water level
is below the loading door opening, simply hold down the ON/OFF button. If the
temperature inside is safe the door will unlock (the relevant indicator icon will
go out).
If there is enough water inside the machine that it would spill on the floor when
the door is opened, the machine will have to be drained.
To do that turn the machune off by holding down the ON/OFF button. The current
program will be aborted.
Then turn the machine on and select the «Spin» program and set the speed
to «0». Water will be drained from the machine and the door will unlock upon
program completion.
You can now turn the machine off.
AUTOMATIC LAUNDRY BALANCING
The machine is equipped with an automatic system that detects an imbalance.
If, before the start of tumble-drying the machine detects that the laundry is
unevenly distributed in the drum, the latter will rotate until the imbalance is
rectified.
However, if this process takes too long without success, the spinning will be
aborted to prevent excessive vibrations.
Should this happen, please ensure that the clothes inside the machine are not
entangled or caught together and start the «Spin» program after manually
distributing the laundry.
If there is a few clothes in the machine (e.g. a single pair of jeans or a bog towel),
the machine may refuse to start tumble-drying because of an obvious imbalance.
Therefore, please add a certain quantity of smaller items to every batch, so as to
ensure an even distribution of laundry during tumble-drying.
7. MAINTENANCE
ATTENTION
Attention! Always pull the plug from the electric socket and close the water
supply valve before cleaning, care and maintenance described below.
Never use solvents for cleaning to avoid damage to the washing machine and
the emission of toxic or explosive gases.
Do not spill water on the washing machine while cleaning.
Do not use PCMX (chloroxylene) -containing detergents, ethyl alcohol, formic
acid or their equivalents for cleaning the appliance, as these substances can
damage it.
CLEANING THE APPLIANCE
Regular and careful cleaning of the appliance will allow
extending its service life and retain its appealing exterior. If
necessary wipe the outer surface of the machine with a mild,
non-abrasive detergent. In case of a water spill, immediately
collect the water with a towel. Do not use sharp objects to
clean the machine to avoid damaging the housing and
impeding its operation.
ATTENTION
Never use aggressive chemicals, abrasive cleaning agents or solvents for
cleaning the appliance. They can damage the exterior finish.
CLEANING THE INSIDE OF THE DRUM
Wipe the drum dry after each use to remove any residues from the tap water,
washing chemicals, dirt and fabric particles, as well as to prevent additional
moisture from staying inside the drum and causing mould growth.
Metal clothing components (buttons, zippers, studs) can leave rust stains inside
the drum – take care to remove these stains without delay. The use of aggressive
detergents or rust removers for cleaning the drum is not allowed, therefore
regular preventive care is the best solution.
Besides, the washing machine has «Drum clean» function to assist you in
hygiene maintenance.
CLEANING THE DOOR GLASS AND SEAL
Wipe the glass and seal after each laundry to remove
pile and stains.
Remove coins, buttons and other small objects from the
folds of the door seal after each laundry.
Water staying for a prolonged time inside the folds of
the door seal can cause an unpleasant smell.
CLEANING THE PUMP FILTER
The drain pump filter can retain scraps of fabric and small foreign objects during
laundry.
Regularly clean the filter to ensure proper operation of the washing machine.
Check the pump if the machine fails to drain water or tumble dry the laundry,
as well as if it emits an unusual noise during draining, which may be caused by
foreign objects blocking the pump.
Depending on the program, hot water may be pumped through the drain pump.
Never remove the pump cover during the rinsing cycle. Wait for the appliance
to complete operation in the relevant mode and start draining the water.
Ensure the filter and the cover plate are properly seated when reinstalling
them.
1. Remove the cover plate.
2. Remove the filter by turning it counterclockwise.
3. Remove foreign objects from the filter.
4. Reinstall the filter and close the cover plate.

Содержание

Скачать