Centek CT-1962 Инструкция по эксплуатации онлайн [48/52] 810074

Centek CT-1962 Инструкция по эксплуатации онлайн [48/52] 810074
47
If the current stage of the washing cycle allows making the selected changes, they
will be implemented.
Resume machine operation by pressing the «Start/Pause» button.
NOTE: Do not add detergent if you have changed the program.
LAUNDRY TOP
-
UP
To load additional clothes into the machine, put it on hold by pressing the «Start/
Pause» button. If the water level allows this and the temperature inside is not too high,
the door will unlocked (the relevant indicator will disappear).
Open the door, add clothes into the drum (do not exceed the maximum batch weight).
Close the door and resume machine operation by pressing the «Start/Pause» button.
INTERRUPTING THE CURRENT PROGRAM
You may need to prematurely abort the machine operation. If the water level is below
the loading door opening, simply hold down the ON/OFF button. If the temperature
inside is safe the door will unlock (the relevant indicator icon will go out).
If there is enough water inside the machine that it would spill on the floor when the
door is opened, the machine will have to be drained.
To do that turn the machune off by holding down the ON/OFF button. The current
program will be aborted.
Then turn the machine on and select the «Spin» program and set the speed to («-
-»). Water will be drained from the machine and the door will unlock upon program
completion.
You can now turn the machine off.
IMBALANCE PROTECTION
The machine is equipped with an automatic system that detects an imbalance. If, before
the start of tumble-drying the machine detects that the laundry is unevenly distributed
in the drum, the latter will rotate until the imbalance is rectified.
However, if this process takes too long without success, the spinning will be aborted to
prevent excessive vibrations.
Should this happen, please ensure that the clothes inside the machine are not
entangled or caught together and start the «Spin» program after manually distributing
the laundry.
If there is a few clothes in the machine (e.g. a single pair of jeans or a bog towel),
the machine may refuse to start tumble-drying because of an obvious imbalance.
Therefore, please add a certain quantity of smaller items to every batch, so as to
ensure an even distribution of laundry during tumble-drying.
7. MAINTENANCE
ATTENTION
Attention! Always pull the plug from the electric socket and close the water supply
valve before cleaning, care and maintenance described below.
Never use solvents for cleaning to avoid damage to the washing machine and the
emission of toxic or explosive gases.
Do not spill water on the washing machine while cleaning.
Do not use PCMX (chloroxylene) -containing detergents, ethyl alcohol, formic acid
or their equivalents for cleaning the appliance, as these substances can damage it.
CLEANING THE APPLIANCE
Regular and careful cleaning of the appliance will allow
extending its service life and retain its appealing exterior. If
necessary wipe the outer surface of the machine with a mild,
non-abrasive detergent. In case of a water spill, immediately
collect the water with a towel. Do not use sharp objects to clean
the machine to avoid damaging the housing and impeding its
operation.
ATTENTION
Never use aggressive chemicals, abrasive cleaning agents or solvents for cleaning the
appliance. They can damage the exterior finish.
CLEANING THE INSIDE OF THE DRUM
Wipe the drum dry after each use to remove any residues from the tap water, washing
chemicals, dirt and fabric particles, as well as to prevent additional moisture from
staying inside the drum and causing mould growth.
Metal clothing components (buttons, zippers, studs) can leave rust stains inside
the drum take care to remove these stains without delay. The use of aggressive
detergents or rust removers for cleaning the drum is not allowed, therefore regular
preventive care is the best solution.
Besides, the washing machine has «Drum clean» function to assist you in hygiene
maintenance.
CLEANING THE DOOR GLASS AND SEAL
Wipe the glass and seal after each laundry to remove pile
and stains.
Remove coins, buttons and other small objects from the
folds of the door seal after each laundry.
Water staying for a prolonged time inside the folds of the
door seal can cause an unpleasant smell.
CLEANING THE PUMP FILTER
The drain pump filter can retain scraps of fabric and small foreign objects during
laundry.
Regularly clean the filter to ensure proper operation of the washing machine.
Check the pump if the machine fails to drain water or tumble dry the laundry, as well
as if it emits an unusual noise during draining, which may be caused by foreign objects
blocking the pump.
Depending on the program, hot water may be pumped through the drain pump.
Never remove the pump cover during the rinsing cycle. Wait for the appliance to
complete operation in the relevant mode and start draining the water.
Ensure the filter and the cover plate are properly seated when reinstalling them.
1. Remove the cover plate.
2. Remove the filter by turning it counterclockwise.
3. Remove foreign objects from the filter.
4. Reinstall the filter and close the cover plate.
CLEANING THE WATER INTAKE FILTER
1. Close the valve and disconnect the tube from it.
2. Disconnect the water supply tube from the washing machine. Pull out the filter with
long pliers.
3. Clean the water intake filter.
4. Refit the filter and reconnect the water supply tube.
5. Clean the filter every 3 month to ensure proper operation of the washing machine.
NOTE: Clean the valve filter first, then the filter in the washing machine.
CLEANING THE WASHING AGENT TRAY AND ITS COMPARTMENTS
1. Press the latch (located above the rinser/conditioner compartment) and remove
the tray.
2. Rinse the tray with water.
3. Clean the inside of the compartment with an old toothbrush or something similar.
4. Reinstall the tray and return it to its original position.
NOTE:
Do not use alcohol, solvents and chemicals for cleaning.
It is recommended to clean the washing agent tray every 3 months.

Содержание

Скачать