![Ака Signum 7272M MFT version 1.00 [20/34] Display settings](/img/pdf.png)
Ака Signum 7272M MFT version 1.00 [20/34] Display settings
![Ака Signum 7272M MFT version 1.00 [20/34] Display settings](/views2/2041883/page20/bg14.png)
20
ООО «фирма «АКА», +7(495)621-0481, http://aka.2000.ru aka_md@mail.ru
Селективный металлодетектор «Сигнум MFT» 7272М. Руководство по эксплуатации.
Optionally the software can be switched off. The inclusion of DHR is reflected on the screen
in the form of an inscription of "HR" in the upper right-hand corner under the low-battery
indicator. Reaction to these in the RT channel remains.
Attention! The algorithm is turned off automatically in the program
“MM1” and “MM2”
Speed of Auto tracking AGT [off/1 .. 6].
This option allows you to set the speed
limit of the auto tracking of the ground (not to be confused with balancing on a ground).
Auto tracking allows the device to automatically adjust to the slow changes of temperature
and salinity of the soil. It should be noted that this action should in no way replace the
procedure for ground balancing, and only adjusts the balance of soil in small amounts
during the search. In some cases (large amounts of metal trash or a cluster of hot stones)
APB may not work properly. In these circumstances, you should disable the APB.
Attention! If the device has not been used for a long time, for correct operation
of APB it is necessary to ground balance
Gain [1..10] This parameter is used to set the sensitivity of the device in the Real
Time and Identification channels at the same time. In most cases, we recommend that
this value is not set to more than 7. Smaller values can be useful, for example, to search
for large objects that are not deep or in trashy areas.
Shift Frequency [ -5. .. the Central frequency of the device. +5].
This
parameter adjusts the operating frequency shift and is designed to reduce the effect of the
mutual influence of devices operating in close proximity to each other. By adjusting this
parameter, on both instruments, the users can achieve a minimum influence on each other
and improve the comfort of working together at close distances without significant loss of
sensitivity and identification.
For a more effective suppression of the mutual influence of two nearby
detectors it is recommended to spread their operating frequencies.
Always remember that nearby operating instruments can significantly reduce
the search depth.
It is best to choose the level of difference between the operating frequencies
experimentally by setting the distance between the devices and testing the sensitivity of the
devices.
Remember that the detectors must be located in the same plane, which
corresponds to their actual relative position during the search.
Attention! After adjusting the frequency shift of the device remember to perform
the ground balance procedure
DISPLAY SETTINGS
Backlight.
Allows you to change the brightness of the screen. The far left light
indicator corresponds to the complete shutdown of the backlight. Remember that too
much backlight level reduces the operating time of the battery life.
Contrast.
Sets the desired level of contrast of the display.
Accumulation
[1..4]. Option allows you to store the display from 1 to 4
hodograph images simultaneously. Displaying multiple hodographs may be useful, for
example, in the analysis of responses from the same target while scanning from different
angles or directions
.
Содержание
- Discriminating metal detector 1
- Instruction manual 1
- Signum mft 1
- Contents 3
- General description 4
- General information 4
- Package contents 5
- Technical specifications 5
- Getting started 6
- Power supply 6
- Controls and connections 7
- Display screen 9
- St sensitivity rt sensitivity volume 9
- Warning setting of the st sensitivity above 11 and especially 14 can lead to a significant increase in the amount of false positives from the soil in high salinity or when bumping the search coil 9
- Ground balance 10
- Make the soil invisible to the instrument i e exclude false signals from the ground where there is no target 10
- Successiv 12
- Discrimination search mode and setup 14
- Search mode all metal 15
- Dynamic and static modes 16
- Mode economy 17
- Mode s algorithm 17
- Mode turbo 17
- Multi frequency 18
- Parameter menu 19
- Search options 19
- Accumulation 20
- Attention the algorithm is turned off automatically in the program 20
- Backlight 20
- Display settings 20
- Mm1 and mm2 20
- Shift frequency 5 the central frequency of the device 5 20
- 2 1 4 1 7 21
- Real time before the threshold short tone 21
- Real time multifrequency 21
- Sound settings 21
- Additional menu add menu 22
- Menu options 22
- Other settings 23
- Tone settings rt 23
- Tone settings st 23
- User programs 23
- Always go back to them to perform this you must first turn on the device while at the 24
- Factory default values for all parameters are stored in memory and the user can 24
- However one should pay attention to two points unless absolutely necessary do not place a high value for the backlight setting doing so may reduce the operation time with one set of batteries it is also not recommended to set too high a level for the parameter duration st when working in trashy areas for a clearer separation of closely spaced targets 24
- Program 2 designed to search in trashy areas has a good response but slightly inferior in sensitivity program 3 is the main program of research combining the best combinations for a comfortable search with near maximum sensitivity program 4 for when you want to search at slightly greater depths however it is worth remembering that it reduces the comfort of searching identifying deteriorating properties of the device as well as the time from one set of batteries is reduced by 2 3 times remember that the default settings are not an absolute but offered only as a starting point to assist your search experiment and we hope that in the near future you will make your own comfortable and effective progra 24
- Same time holding down the button and hold it until the end of the melody same time holding down the button and hold it until the end of the melody program 1 is designed for easy and comfortable search of shallow objects 24
- Settings backlight contrast and cont ct directly with the search capabilities of 24
- The device are not affected and can be chosen based on the preferences of the particular user 24
- Using the hodograph for identification 25
- Replacing the coil 26
- Search and identification methods 26
- Normal operating mode 28
- S mode algorithm 28
- Large eddy current loops 30
- Searching for metal objects with 30
- Examples of some common target 32
- Us 5 cent nickel 32
- Warranty information 33
Похожие устройства
- Ака СИГНУМ MFT/MFD модель 7272М версия 2.0х Руководство пользователя
- Ака Intronik STF Руководство пользователя ч2
- Ака Intronik STF Руководство пользователя
- Ака Intronik STF Краткая инструкция по эксплуатации
- Ака Разгрузка Руководство пользователя
- Ака Сорекс Pro 7281 Руководство пользователя
- Ака УНИСКАН модель 7215М Руководство пользователя
- ACV BOILER TKAN 300 По Монтажу, эксплуатации и обслуживанию котла
- Kuppersberg WM 490 W Инструкция по эксплуатации
- Kuppersberg WM 410 W Инструкция по эксплуатации
- Kuppersberg WID 56149 W Инструкция по эксплуатации
- Kuppersberg WDM 560 Инструкция по эксплуатации
- Kuppersberg WM 581 W Инструкция по эксплуатации
- Kuppersberg WM 520 W Инструкция по эксплуатации
- Kuppersberg WM 411 W Инструкция по эксплуатации
- Kuppersberg RFWI 1890 SIG Инструкция по эксплуатации
- Kuppersberg RFFI 184 WG Инструкция по эксплуатации
- Kuppersberg RFFI 184 BG Инструкция по эксплуатации
- Kuppersberg NMFV 18591 DX Инструкция по эксплуатации
- Kuppersberg NFFD 183 BKG Инструкция по эксплуатации