Kuppersberg FBU 816 [38/80] Door seals cleaning

Kuppersberg FBU 816 [38/80] Door seals cleaning
38
TECHNICAL PASSPORT ENGLISH
Built-under freezer
Door seals cleaning
Take care to keep door seals clean.
Sticky food and drinks can cause seals
to stick to the cabinet and tear when
you open the door. Wash seal with
a mild detergent and warm water. Rinse
and dry it thoroughly after cleaning.
Caution! Only after the door seals
are completely dry should the appliance
be powered on.
Replacing the LED light
Warning: The LED light must be
replaced by a competent person. If the
LED light is damaged, follow the steps
below:
1. Unplug your appliance.
2. Remove light cover by rising up
and pulling out the LED light.
3. Hold the LED light with one hand
and pull it with the other hand while
pressing the connector latch.
4. Replace LED light and snap it
correctly in place and recover the light
cover.
HELPFUL HINTS AND TIPS
Energy Saving Tips
We recommend that you follow the
tips below to save energy.
 Try to avoid keeping the door
open for long periods in order to
conserve energy.
Ensure the appliance is away from
any sources of heat (direct sunlight,
electric oven or cooker etc.)
 Don‘t set the temperature colder
than necessary.
 Don’t store warm food or
evaporating liquid in the appliance.
 Place the appliance in a well
ventilated, humidity free, room. Please
refer to “Installing your New Appliance”
chapter.
 If the diagram shows the correct
combination for the drawers, crisper and
shelves, do not adjust the combination
as this is designed to be the most energy
efcient conguration.
Hints for fresh food
refrigeration
 Do not place hot food directly into
the refrigerator or freezer, the internal
temperature will increase resulting in
the compressor having to work harder
and will consume more energy.
 Do cover or wrap the food,
particularly if it has a strong avor.
 Place food properly so that air
can circulate freely around it.

Содержание

Скачать