Kuppersberg KWD 802 Black [29/56] Possible installation examples
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Kuppersberg KWD 802 Black [29/56] Possible installation examples

Kuppersberg KWD 802 Black [29/56] Possible installation examples
ENGLISH TECHNICAL PASSPORT
Warmer drawer
29
Possible installation examples
 Positioning the appliance in the
housing unit
Push the appliance into the hous-
ing unit as far as the vapour strip and
align it.
 Ensure that the housing unit is
aligned at a right angle
 Open the drawer, and use
the 2 screws supplied to secure the
appliance to the side walls of the
housing unit. The appliance is supplied
with three metal trims which have an
adhesive underside.
These trims must be stuck on to
the drawer so that they seal any gaps
between the housing unit and the ap-
pliance. Any air gap created acts as ad-
ditional insulation and helps prevent
heat-loss.
 Carefully pull the protective foil
off the underside of each trim.
 Then position the trim as shown
in the illustration so that they are ush
with the side walls and the back wall of
the housing unit and then stick them to
the plate warmer. if the unit does not
have a back wall you do not need the
third trim.
 Build in the combination appli-
ance in accordance with its operating
and installation instructions
 In order to ensure adequate
ventilation ,the back panel of the cabi-
net unit must be removed .Installing
the warmer drawer so that it rests on
two strips of wood is preferable .If the
warmer drawer rests on a continuous
,at surface ,there must be an aperture
of at least 45×560mm.

Содержание

Похожие устройства

Скачать