Home
Главная
Hermes Technics
Настенные
HT-SOCHI-09 R4-00014068
Инструкция по эксплуатации Страница: 50

Hermes Technics HT-SOCHI-09 R4-00014068 [50/64] Installation manual installation of the outdoor unit

INSTALLATION MANUAL---Installation of the Indoor unit

INSTALLATION OF THE INDOOR UNIT

refrigerant

pipe

refrigerant

pipe

insulation

sleeve

connection

(for heat-pump)

cable 1

connection

cable

Probe

cable(for heat-pump)

Condensed water

drain pipe

Covered by vinyl tape

After having connected the pipe according to the instruc-

tions, install the connection cables. Now install the drain

pipe. After connection,lag the pipe, cables and drain pipe

with the insulating material.

1. Arrange the pipes ,cables and drain hose well.

2. Lag the pipe joints with insulating material , securing

it with vinyl tape.

3. Run the bound pipe , Cables and drain pipe through

the wall hole and mount the indoor unit onto the upper

part of the mounting plate securely.

4. Press and push the lower part of the indoor unit tightly

against the mounting plate

mounting plate

INSTALLATION MANUAL---Installation of the outdoor unit

The outdoor unit should be installed on a solid wall

and fastened securely.

The following procedure must be observed before co-

nnecting the pipes and connecting cables : decide

which is the best position on the wall and leave enough

space to be able to carry out maintenance easily.

Fasten the support to the wall using screw anchors

which are particularly suited to the type of wall;

Use a larger quantity of screw anchors than normally

required for the weight they have to bear to aviod

vibration during operation and remain fastened in the

same position for years without the screws becoming

loose.

The unit must be installed following the national

regulations.

drain pipe

The condensed water and the ice formed in the outdoor

unit during heating operation can be drained away thro-

ugh the drain pipe

1. Fasten the drain port in the 25mm hole placed in the

part of the unit as shown in the picture.

2. Connect the drain port and the drain pipe.

Pay attention that water is drained in a suitable place.

Outdoor unit condensed water drainage

(only for heat pump models)

drain port

Содержание

Похожие устройства

ENGLISH INSTALLATION MANUAL Installation of the Indoor unit INSTALLATION OF THE INDOOR UNIT After having connected the pipe according to the instruc tions install the connection cables Now install the drain pipe After connection jag the pipe cables and drain pipe with the insulating material 1 Arrange the pipes cables and drain hose well 2 Lag the pipe joints w ith insulating material securing it with vinyl tape 3 Run the bound pipe Cables and drain pipe through the wall hole and mount the indoor unit onto the upper part of the mounting plate securely 4 Press and push the lower part of the indoor unit tightly against the mounting plate INSTALLATION MANUAL Installation of the outdoor unit The outdoor unit should be installed on a solid wall and fastened securely The following procedure must be observed before co nnecting the pipes and connecting cables decide which is the best position on the wall and leave enough space to be able to cany out maintenance easily Fasten the support to the wall using screw anchors which are particularly suited to the type of wall Use a larger quantity of screw anchors than normally required for the weight they have to bear to aviod vibration during operation and remain fastened in the same position for years w ithout the screws becoming loose The unit must be installed following the national regulations Outdoor unit condensed water drainage only for heat pump models The condensed water and the ice formed in the outdoor unit during heating operation can be drained away thro ugh the drain pipe 1 Fasten the drain port in the 25mm hole placed in the part of the unit as shown in the picture 2 Connect the drain port and the drainpipe Pay attention that water is drained in a suitable place 49

Скачать