Briggs & Stratton 1022 E 1696720 Инструкция к Briggs&Stratton 1022 E 1696720 онлайн [10/212] 832275

Not for

Reproduction

Engage the Auger

DANGER

The discharge chute contains a rotating auger that throws

snow. Fingers or feet can quickly become caught in the

auger that will result in traumatic amputation or severe

laceration.

Failure to observe and obey these safety instructions will

result in traumatic amputation or severe laceration.

1. Pull the auger control (A, Figure10) against the handle.

2. Release the auger control to disengage the auger. The

auger must stop within 5 seconds after the auger control

is released. If it does not, adjust the cable. SeeAdjust the

Auger Control Cable. If the auger still does not stop within

5 seconds, see an authorized service dealer.

3. For the self-propelling feature to work, you must tip the

unit.

NOTICE Do not overload the machine capacity by

attempting to clear snow at too fast of a rate.

Headlight

Some models are equipped with a headlight that illuminates

the area in front of the snowthrower. When you START the

engine, the headlight turns ON. There is no switch.

Clean a Clogged Discharge Chute

DANGER

The discharge chute contains a rotating auger that throws

snow. Fingers can quickly become caught in the auger that

can result in traumatic amputation or severe laceration.

DO NOT clean a clogged discharge chute with your hands.

Always use a clean-out tool.

1. Stop the engine and remove the key or the Push/Pull

key.

2. Make sure that the auger does not rotate.

3. Use a clean-out tool to remove snow from the discharge

chute. DO NOT clean a clogged discharge chute with

your hands!

Maintenance and Adjustments