STATUS CP 115 07410601 [7/36] Chain saw safety warnings

Chain saw safety warnings

• When an extension cable is required, you must en ure that it has the right ampere

rating for your power tool and it is in safe electrical condition.

• WARNING: Always switch o and unplug the power tool prior to any adjustment,

servicing or maintenance.

• While operating the machine, always hold it rmly with both hands and provide for a

secure stance. The power tool is guided more securely with both hands.

• Always keep the cable away from the working area of the power tool. Keep cable or

extension cable away from oil, sharp edges or heat sources.

• Never use the machine with a damaged cable. Do not touch the damaged cable and

pull the mains plug when the cable is damaged while operating. Damaged cables

increase the risk of electric shock.

• Check regularly the cable and the extension cable. In case of damage disconnect

immediately the cable from the mains. If the replacement of the cable is necessary, this

has to be done by the manufacturer or his agent in order to avoid a safety hazard.

• Always be sure you have a rm footing. Be sure no one is below when using the tool in

high locations.

• Keep work area clean.

• he tool must be used only for its prescribed purpose. Any use other than those

mentioned in this manual will be considered a case of misuse. The user and not the

manufacturer shall be liable for any damage or injury resulting from such cases of

misuse.

• To use this tool properly, you must observe the safety regulations, the assembly

instructions and the operating instructions found in this manual. All persons who

use and service the machine have to be acquainted with this manual and must be

informed about its potential hazards.

• Children and frail people must not use this power tool. Children should be supervised

at all times if they are in the area in which the tool is being used. It is also imperative

that you observe the accident prevention regulations in force in your area. The same

applies for general rules of occupational health and safety.

• The manufacturer shall not be liable for any changes made to the tool nor for any

damage resulting from such changes.

• Do not operate the machine if the chain is damaged or heavily worn out.

• Switch o and unplug the machine and prior to: transportation, conservation,

inspection or maintenance. Place the sheath on the guide bar when transporting the

chain saw or during storage.

• Do not operate the machine in the presence of ammable gases or liquids.

• Carry the chain saw by the front handle with the guide bar pointing forward.

• Never carry the chain saw by the cable.

• Familiarize with the chain saw capabilities and do not attempt operations which might

overload it.