Dewalt 18 В XR пресс-масленка DCGG571NK-XJ [16/48] Optional accessories

Dewalt 18 В XR пресс-масленка DCGG571NK-XJ [16/48] Optional accessories
14
ENGLISH
Protecting the Environment
Separate collection. Products and batteries marked
with this symbol must not be disposed of with normal
householdwaste.
Products and batteries contain materials that can
be recovered or recycled reducing the demand for raw
materials. Please recycle electrical products and batteries
according to local provisions. Further information is available at
www.2helpU.com.
Rechargeable Battery Pack
This long life battery pack must be recharged when it fails
to produce sufficient power on jobs which were easily done
before. At the end of its technical life, discard it with due care for
our environment:
Run the battery pack down completely, then remove it from
thetool.
Li-Ion cells are recyclable. Take them to your dealer or a
local recycling station. The collected battery packs will be
recycled or disposed ofproperly.
Optional Accessories
WARNING: Since accessories, other than those offered
by
DeWALT
, have not been tested with this product, use
of such accessories with this tool could be hazardous.
To reduce the risk of injury, only
DeWALT
recommended
accessories should be used with thisproduct.
Consult your dealer for further information on the
appropriateaccessories.
Troubleshooting
Problem Possible Cause Possible Solution
Unable to pull back rod Vacuum build up Unscrew the purge valve to release vacuum.
Unable to push rod forward Pressure build up Unscrew the purge valve to release pressure.
Rod is still connected to plunger Rotate grease tube handle 90 degrees to disengage it.
No grease when trigger is pulled Grease tube is empty Add grease.
Air pockets in the grease tube Refer to Purging Air Pockets.
Check valve is clogged Refer to Cleaning Contamination from the
Check Valve.
Filter is clogged Refer to Cleaning Contamination from the Filter.
Grease appears in relief valve Zerk fitting is blocked Disconnect coupler from fitting, clean zerk fitting and
grease path.
Motor does not run when trigger is pulled Battery Make sure the battery is fully charged.
Grease leaks out of the back of the grease tube Rubber seal is flipped the wrong direction Refer to Preparing the Grease Gun for Suction
and Filler Pump Filling.

Содержание

Похожие устройства

Скачать