Bosch GO 0.601.9H2.020 Инструкция по эксплуатации онлайн [18/270] 860795

18 | English

1 609 92A 3WX | (27.9.17)

Bosch Power Tools

Locking the spindle in place

(see figure B)

To lock the spindle in place, slide the ro-

tational direction switch 3 into the mid-

dle position.

This enables screws to be screwed in,

even when the battery is empty and al-

lows for the machine to be used as a

screwdriver.

Setting the torque

With the torque preselection ring 5, the

required torque can be preselected in

6 steps. The inserted tool is stopped as

soon as the set torque is reached.

Position 1:

Lower torque for screwing in screws

with small diameter or into soft materi-

als.

Position 6:

Higher torque for screwing in screws

with large diameter or into hard materi-

als.

Starting and Stopping (see figure A)

To start the power tool, exert pressure

on the spindle and maintain this pres-

sure to continue using the power tool.

To switch it off, stop exerting pressure

on the spindle.

Battery Charge-control Indicator

The battery charge-control indicator on

the power tool consists of three green

LEDs. It indicates the charging condi-

tion of the battery for a few seconds af-

ter the tool is switched on and off.

100

%60

%30

OBJ_BUCH-3243-004.book Page 18 Wednesday, September 27, 2017 10:26 AM