Bosch GOP 12V-28 0.601.8B5.020 [17/301] Changing the tool
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Bosch GOP 12V-28 0.601.8B5.020 [17/301] Changing the tool

Bosch GOP 12V-28 0.601.8B5.020 [17/301] Changing the tool
English | 17
Bosch Power Tools 1 609 92A 2LW | (16.1.17)
When no LED lights up after switching on, then the battery is
defective and must be replaced.
Changing the Tool
Before any work on the machine itself (e. g. mainte-
nance, tool change, etc.) as well as during transport
and storage, remove the battery from the power tool.
There is danger of injury when unintentionally actuating
the On/Off switch.
Wear protective gloves when changing application
tools/accessories. Contact with the application tool/
accessory can lead to injuries.
Selecting the Application Tool/Accessory
The following table shows examples for application tools. Further application tools can be found in the extensive Bosch acces-
sories program.
LED Capacity
Continuous lighting 3 x green ≥2/3
Continuous lighting 2 x green ≥1/3
Continuous lighting 1 x green <1/3
Flashing light 1 x green Reserve
Flashing light 3 x green Empty
Accessory GOP 12V-28
Accessory Material Application
BIM segment saw
blade
Wooden materials,
Plastic,
Non-ferrous metals
Separating and plunge cuts; also for sawing close to edges,
in corners and hard to reach areas;
example: shortening already installed bottom rails or door
hinges, plunge cuts for adjusting floor panels
Base plate for
sanding, series
Delta 93 mm
Depends on sanding sheet Sanding surfaces close to edges, in corners or hard to
reach areas;
depending on the sanding sheet for, e.g., sanding wood,
paint, varnish, stone
Fleeces for cleaning and for texturing wood, removing rust
from metal and for keying varnishes, polishing felt for pre-
polishing
Profile sander
Wood,
Pipes/Profile,
Paint,
Varnishes,
Filler,
Metal
Convenient, efficient sanding of profiles up to a diameter of
55 mm;
Red sanding sheets for sanding wood, pipes/profiles,
varnishes, fillers and metal
BIM plunge cut
saw blade, wood
and metal
Softwood,
Soft plastics,
Plasterboard,
Thin-walled aluminium
and non-ferrous metal
profiles,
Thin sheet metals,
Non-hardened nails and
screws
Smaller separating and plunge cuts;
example: cutting an opening for sockets, flush cutting a
copper pipe, plunge cuts in plasterboard
Filigree adjustment work in wood;
example: sawing openings for locks and fittings
HCS plunge cut
saw blade, wood
Wooden materials,
Soft plastics
Separating and deep plunge cuts; also for sawing close to
edges, in corners and hard to reach areas;
example: narrow plunge cut in solid wood for installing a
ventilation grid
Bi-metal plunge
cut saw blade,
hardwood
Hardwood,
Laminated panels
Plunge cuts in laminated panels or hardwood;
example: installing skylights
OBJ_BUCH-2853-001.book Page 17 Monday, January 16, 2017 1:56 PM

Содержание

Похожие устройства

Скачать