McCulloch M46-160AWREX 9676218-01 [75/412] Maintenance

McCulloch M46-160AWREX 9676218-01 [75/412] Maintenance
MAINTENANCE
English 75
General
Always use genuine accessories.
Maintenance schedule
In the maintenance schedule you can see which parts of
your machine that require maintenance, and with which
intervals it should take place. The intervals are calculated
based on daily use of the machine, and may differ
depending on the rate of usage.
*See instructions in the section "Machine’s safety
equipment".
General inspection
Check that nuts and screws are tight.
External cleaning
Brush leaves, grass and the like off of the lawn mower.
Do not use a high pressure washer to clean the
machine.
Never flush water directly on the engine.
Clean the air intake on the starter. Check the starter
and starter cord.
When cleaning under the cutting deck, turn the
machine with the spark plug upwards. Empty the fuel
tank.
Oil level
The lawn mower should stand on flat ground when you
check the oil level. Check the oil level with the dipstick on
the oil filler cap. Unscrew the oil cap, clean the dipstick
located on the cap and insert the cap again without
screwing it down. Check the oil level on the dipstick.
If the oil level is low, fill using engine oil up to the upper
level on the dipstick.
Cutting equipment
Check the cutting attachment for damage or cracks. A
damaged cutting attachment should always be
replaced.
Always ensure the cutter is well ground and balanced
correctly.
Replacing the blades
Dismantling
Unscrew the bolt holding the cutter.
Remove the old blade. Make sure the blade bracket is
free of damage. Also check that the blade bolt is
undamaged and that the engine shaft is not bent.
!
WARNING! The user must only carry out
the maintenance and service work
described in this Operator’s Manual.
More extensive work must be carried out
by a service workshop.
Switch off the engine before carrying out
any checks or maintenance. Prevent
unintentional starting by removing the
ignition cable from the spark plug.
The life span of the machine can be
reduced and the risk of accidents can
increase if machine maintenance is not
carried out correctly and if service and/or
repairs are not carried out professionally.
If you need further information please
contact your nearest service workshop.
CAUTION! When the machine is tilted, make sure the air
filter always is placed in the highest position.
Before starting
Weekly
maintenance
Monthly
maintenance
General inspection Spark plug Air filter
External cleaning Muffler* Fuel system
Oil level
Cutting equipment
Cutting cover*
Adjusting the
clutch wire
Engine brake
handle*
CAUTION! The blades should be balanced after
sharpening.
Damaged blades should be replaced when hitting
obstacles that result in a breakdown.
!
WARNING! Always wear heavy-duty
gloves when servicing and maintaining
the cutting equipment. The cutters are
very sharp and cuts can occur very
easily.

Содержание

Похожие устройства

MAINTENANCE General General Inspection WARNING The user must only carry out the maintenance and service work described In this Operator s Manual More extensive work must be carried out by a service workshop Switch off the engine before carrying out any checks or maintenance Prevent unintentional starting by removing the Ignition cable from the spark plug The life span of the machine can be reduced and the risk of accidents can Increase If machine maintenance Is not carried out correctly and If service and or repairs are not carried out professionally If you need further Information please contact your nearest service workshop CAUTION I When the machine is tilted make sure the air filter always is placed in the highest position Check that nuts and screws are tight External cleaning Brush leaves grass and the like off of the lawnmower Do not use a high pressure washer to clean the machine Never flush water directly on the engine Clean the air intake on the starter Check the starter and starter cord When cleaning under the cutting deck turn the machine with the spark plug upwards Empty the fuel tank Oil level The lawn mower should stand on flat ground when you check the oil level Check the oil level with the dipstick on the oil filler cap Unscrew the oil cap clean the dipstick located on the cap and insert the cap again without screwing it down Check the oil level on the dipstick If the oil level is low fill using engine oil upto the upper level on the dipstick Always use genuine accessories Cutting equipment Maintenance schedule In the maintenance schedule you can see which parts of your machine that require maintenance and with which intervals it should take place The intervals are calculated based on daily use of the machine and may differ depending on the rate of usage Check the cutting attachment for damage or cracks A damaged cutting attachment should always be replaced Always ensure the cutter is well ground and balanced correctly Before starting Weekly maintenance Monthly maintenance CAUTION The blades should be balanced after sharpening General inspection Spark plug Air filter External cleaning Muffler Fuel system Damaged blades should be replaced when hitting obstacles that result in a breakdown Oil level Replacing the blades Cutting equipment Cutting cover Adjusting the clutch wire Engine brake handle See instructions in the section Machine s safety equipment WARNING Always wear heavy duty gloves when servicing and maintaining the cutting equipment The cutters are very sharp and cuts can occur very easily Dismantling Unscrew the bolt holding the cutter Remove the old blade Make sure the blade bracket is free of damage Also check that the blade bolt is undamaged and that the engine shaft is not bent English 75

Скачать