Home
Главная
Al-Ko
Роботы-газонокосилки
Robolinho 500 E 119833
Инструкция к AL-KO Robolinho 500 E 119833 Страница: 46

Al-Ko Robolinho 500 E 119833 Инструкция к AL-KO Robolinho 500 E 119833 онлайн [46/476] 868062

Al-Ko Robolinho 500 E 119833 Инструкция к AL-KO Robolinho 500 E 119833 онлайн [46/476] 868062

GB

46 Robolinho 500 E/I | 1150 SE

Assembly

2. Fix the base station (03/2) to the floor with

four screw nails (03/1).

4.5 Installing the boundary cable

NOTE

If the supplied boundary cable is too

short, an extension cable can be ob-

tained from your AL-KO dealer or ser-

vice partner.

4.5.1 Connecting the boundary cable to the

base station (03/b)

1. Pull the boundary cable(03/4) out of the

packaging.

2. Remove the cover of the cable shaft (03/3)

on the connection(03/A).

3. Insulate the end of the boundary cable(03/6)

and insert into the terminal(03/7).

4. Close the terminal.

5. Lead the boundary cable through the strain

relief(03/5) out of the cable shaft with cable

reserve.

NOTE

The cable reserve allows smaller correc-

tions to be carried out on the cable guide

later.

6. Place the cover on the cable shaft.

4.5.2 Routing the boundary cable (01)

The boundary cable can be laid on the lawn and

as much as 10 cm under the turf. Laying under

the turf can be carried out by the dealer.

Both variants can be combined with one another.

IMPORTANT!

Danger of damaging the boundary ca-

ble

If the boundary cable is damaged or cut,

the transmission of the control signals to

the appliance is no longer possible. In

this case, the boundary cable must be

repaired or replaced. The boundary ca-

bles are available from AL-KO.

■

Always route the boundary cable di-

rectly on the ground. If necessary,

secure with an additional lawn peg.

■

When laying the boundary cable and

during operation, protect the bound-

ary cable from damage.

■

Do not dig or scarify in the vicinity of

the boundary cable.

1. Attach the boundary cable at regular intervals

with lawn pegs or route it underground (at a

max. depth of 10cm).

2. Route the boundary cable around obstacles:

see chapter 4.5.3 "Excluding obstacles",

page46.

3. Create corridors between individual mowing

areas: see chapter 4.5.4 "Enclosing corridors

(01/h)", page47.

4. Exclude excessive upward or downward

slopes: see chapter 4.5.5 "Avoid gradients

(11)", page47.

5. Create loops of cable: see chapter 4.5.6

"Creating loops of cable (07)", page47.

6. After completing the routing of the boundary

cable, connect to the connector (03/B) of the

base station: see chapter 4.5.1 "Connecting

the boundary cable to the base station (03/

b)", page46.

4.5.3 Excluding obstacles

Depending on the surroundings of the working ar-

ea, the boundary cable must be routed at differ-

ent distances to obstacles. Use the ruler that can

be removed from the packaging to determine the

correct distance.

Похожие устройства