Woods Airmaster WOZ 400, 116м3/ч, выработка озона 400 мг/ч WOZ400 Инструкция по эксплуатации ENG онлайн [11/72] 868597

Woods Airmaster WOZ 400, 116м3/ч, выработка озона 400 мг/ч WOZ400 Инструкция по эксплуатации ENG онлайн [11/72] 868597

GB

11

Operating Instructions

USING AND MAINTAINING YOUR OZONE DEVICE

4. Duration of treatment:

2 to 72 hours, depending on the

intensity of the odour. The average

treatment time is 24 hours.

Ideally, start o with 4-8 hours and

repeat as necessary.

5. After the ozone treatment:

Switch o the ozone device and open

the windows. There will be ozone in

the air after the treatment, it smells

like chlorine. Air the rest of the room

to remove the remaining ozone.

Check the room. If there are still

unwanted odours in there, repeat the

procedure. All aected rooms must be

treated separately.

Permanent installation

The ozone device can be

wall-mounted by means of a “keyhole

solution” (F5) on the underside of the

ozone device.

Connect the mains cable supplied

to the mains socket (A4). The ozone

device can now be started by pressing

the on-o button (A3).

Connecting the silicone

hose (E1)

The nipple and silicone hose

accessories (E1) are mounted in the

connecting nut (B1) and the ozone

can be directed into the space to

be treated such as air conditioning

systems, partition walls, ventilation

ducts and water treatment.

Connecting the ozone

meter (E2)

The ozone meter accessory (E2) is

connected to the USB port (B2) on the

back.

IMPORTANT!

Locate and eliminate whatever is

causing the odour problem before

running the ozone control device,

otherwise the odour will return.

Ozone is harmful when inhaled, so the

ozone device must be used with care.

Do not use the ozone device when

there are people present in the room.

For the Wood’s Airmaster

WOZ400/500, brief exposure (less

than 5 minutes) is non-hazardous.

For the Wood’s Airmaster

WOZ2000/4000, the area must not be

entered at all.

Treatment with the

Wood’s Airmaster

1. Preparation:

Clean the room thoroughly, vacuum

and wipe down all surfaces and/or

repair/eliminate the problem causing

the odour.

2. Make sure that the area is safe to

treat:

Remove pets and plants. Remove

valuable high-tech equipment such as

laptops and valuable oil paintings.

Make sure that there are no people in

the room.

3. Ozone treatment:

Position the ozone device in the

middle of the room (ideally on a

slightly raised surface such as a table).

Connect the mains cable supplied

to the mains socket (A4). The ozone

device can now be started by pressing

the on-o button (A3), and you set

the timer (C) to the preferred time

(models with a timer).

It can take up to about 5 minutes to

achieve the full eect.

Похожие устройства