Norgau 0.1-0.5 Нм, тип NETT-05, с поверкой 053101001/П Инструкция по эксплуатации онлайн [7/28] 872001
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Norgau 0.1-0.5 Нм, тип NETT-05, с поверкой 053101001/П Инструкция по эксплуатации онлайн [7/28] 872001

Norgau 0.1-0.5 Нм, тип NETT-05, с поверкой 053101001/П Инструкция по эксплуатации онлайн [7/28] 872001
7
BEFORE USING THE TORQUE TESTER
POWER ON AND ZEROING THE TORQUE TESTER
Connect signal cable between transducer and display unit
Connect power from the AC adapter or computer to the display
Press
C
to power on the torque tester
If no transducer connected, it will display screen like:
Once transducer connected, it will display screen like:
Usually press
О
to zeroing the torque tester before using it.
TRANSDUCER CONNECTION FAIL
After power on, when transducer plugged-in to the display unit, the connect indicator
RED LED will turn on, once connected, the connect indicator RED LED will turn off and
GREEN LED will turn on
If transducer not connected after plugged-in to the display unit, please check the
connection and power on again.
AUTO POWER OFF
The torque tester will auto power off after about 2 minutes (default value) idle for
power saving. Press
C
, to power on the torque tester again.
Press and hold
C
to power off.
HARDWARE RESET
To do hardware rest, long press
C
(or unplug usb power) to power off the torque
tester then power on again.
Digital Torque Tester NETT SeriesUSER’S MANUAL
EN

Похожие устройства

Скачать