Buffalo TS5400R0804 [134/176] Ups uninterruptible power supply

133

UPS (Uninterruptible Power Supply)

If a UPS (sold separately) is attached, the TeraStation can be automatically shut down for protecting data in the

event of a power outage.

1 Plug the power cable of the UPS to a wall socket.

2 Connect the AC cable of the TeraStation to the UPS.

3 Connect the UPS and TeraStation using a USB cable or serial cable.

4 Turn on the UPS, then the TeraStation.

5 In Settings, click Management.

TeraStation on the same network." After making this selection, enter the IP address of the TeraStation that will

be the sync source in "Other LinkStation or TeraStation's IP Address".

• When the TeraStation is rebooted after an automatic shutdown (such as from a power outage or power

supply problem), verify that the power supply has been restored. If the TeraStation is turned on while it is

still running on the UPS and without the power supply restored, automatic shutdown is not performed, even

after the specified time has elapsed.

• If the power supply from the UPS to the TeraStation is stopped and restarted when UPS recovery is enabled,

the TeraStation is automatically restarted.

Port Trunking

Two Ethernet cables can be used to establish two separate communication routes providing LAN port redundancy