Buffalo TS5400R0804 [43/176] Checking drives

Note: Do not dismount internal drives while a RAID array is rebuilding or RMM is being configured. If you do,

data on the drives may be lost.

Dismounting with the Function Button

Hold down the function button for 8 seconds. The function button will light up blue for 30 seconds as your USB

drives are dismounted. When the dismount is finished, the function button's LED will turn off, then come back on.

You may now unplug any USB drives safely.

Note: After 60 seconds, the function LED will go out and any drives that have not yet been unplugged will be

remounted.

Dismounting from Settings

1 In Settings, click Drives.

2 Click Drives to dismount an internal drive or USB Drives to dismount an external drive.

3 Select the drive to dismount and click Dismount Disk.

4 When the following message is displayed, it is safe to unplug the drive.

Note: To remount the drive, unplug it and then plug it back in.

Checking Drives

A disk check tests the data on a drive in the TeraStation or connected via USB for integrity. Errors are fixed

automatically. With large drives, a disk check may run for many hours. Shared folders cannot be accessed during

a disk check. Do not turn off the TeraStation until the disk check is finished. Use the procedure below to run a disk

check.