Ninebot by Segway KickScooter E25 Black [5/0] Assembling your kickscooter

Latching Axis

4 Assembling Your KickScooter

3. Install six screws (two on each side) with the

included hex wrench.

4. Verify that your KickScooter powers on and oﬀ.

2. Firmly connect the wires inside the handle and

the stem. Slide the handle onto the stem. Be

aware of the correct orientation.

1. Unfold the stem and push it until you hear a

click. Flip up the folding pedal. Then unfold

the kickstand to support the scooter.

Note: Conﬁrm that the latching axis on the

folding mechanism is secured correctly.

3. Install the external battery on the rail and ﬁx it with the M4 (20mm)

screws (2 pcs) and M3 screw (1 pcs), provided with this product.

After they are properly installed, block the screw holes with the

rubber stopper.

2. Install the rail with the M4 (10mm) screws (3

pcs), provided with this product. Please make

sure it is properly ﬁxed.

4. Verify that your KickScooter powers on and oﬀ.

1. Remove the three screws on the stem, as shown. Then

remove the cover near the charge port and remove the

M3 screw.

5 Installing a Second Battery Pack (optional)

Warning: please use the screws provided with

this product only.

Head Light

toward front

06 07