Buffalo WS5600D2406-EU [34/67] Hard drive replacement in case of disk failure on drive 1 or drive 2

34

To restore a Mirrored volume (RAID resynchronization):

(a) Right-click the volume labeled “Failed Redundancy” and click Remove Mirror.

(b) When “Remove Mirror” is displayed, select the drive with its status missing and click OK.

Note: Perform steps (a) and (b) for each volume that requires RAID resynchronization.

(c) Select the new volume where mirroring will be performed, then select Add Mirror.

(d) When “Add Mirror” is displayed, select the drive where mirroring will be performed with the selected volume,

then click Add Mirror.

(e) When “Disk Management” is displayed, click OK.

6 Swing the lock back down until it clicks into place.

7 Close the front cover with the included key.

Press the power button on the TeraStation to turn it on.

Note: If drive 1 is being replaced, the red error LED will light up and “POST ERR: 00D9 Boot from HDD x” will be

displayed on the LCD panel. Wait for the unit to reboot. When the reboot is finished, go on to step 8.

8 Open NAS Navigator2 by double-clicking the icon on the Windows desktop or in the Dock if you have a Mac.

9 Right-click on your TeraStation’s icon, then click Open Remote Desktop.

For Mac, click the TeraStation icon while holding down the control key, then click Open Remote Desktop.

10 Enter the username and password, then click OK. Windows Storage Server opens in the remote desktop.

Note: The default username and password are “Administrator” and “password”.