Brayer BR1021 черный/серебристый [4/0] 7 en en
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Brayer BR1021 черный/серебристый [4/0] 7 en en

Brayer BR1021 черный/серебристый [4/0] 7 en en
6 7en en
is detected, and after it was dropped, unplug the unit
and apply to the service center.
• Transport the kettle in the original package.
• Keep the unit out of reach of children and disabled
• persons.
ELECTRIC KETTLE IS INTENDED FOR HOUSEHOLD
USE ONLY, DO NOT USE THE KETTLE FOR ROOM
HEATING, FOR INDUSTRIAL OR LABORATORY
PURPOSES
BEFORE USING THE KETTLE
After unit transportation or storage at low
temperature, it is necessary to keep it for at least
three hours at room temperature.
• Unpack the kettle and remove all the packaging
materials.
• Keep the original package.
• Check the delivery set.
• Read the safety measures and operating
recommendations.
• Examine the kettle for damages, in case of damage
do not plug it into the mains.
• Makesurethatthespecicationsofpowersupply
voltagespeciedonthelowerpaneloftheunitor
thebasecorrespondtothespecicationsofyour
mains. When using the kettle in the mains with 60
Hz frequency, the unit does not need any additional
settings.
ATTENTION!
Becarefulwhilehandlingthekettle,glassaskcan
break when the kettle is dropped or hit against a solid
object.
• Placethebase(1)onasolidsteadyatandnon-slip
non-metal surface away from heat sources as far as
possible from the edge of the surface.
• Do not place and do not use the kettle in closed
space, for example, in the cupboard or in closed
structures — this can lead to its breakage, cause
harm to the user or damage to his/her property.
• Washtheask(2)withneutraldetergents,rinseand
dry.Wipetheoutersurfaceoftheask(2)witha
slightly damp cloth and then wipe it dry. Do not use
abrasives and coarse scourers for this.
• Before connecting the kettle, make sure that there
arenomoisturedropsonthebase(1),theask(2),
the power cord and the power plug.
• Remove the kettle from the base (1).
• Tollthekettlewithwaterpressthelidopening
button (6) and open the lid (5).
• Fill the kettle with water up to the «MAX» mark,
according to the scale situated on the outer surface
oftheask(3).
• Wipe the base (1), the outer and inner surfaces of the
ask(2)withaclean,slightlydampclothtoremove
dust.
• Close the lid, make sure that the kettle lid is closed
tightly.
• Place the kettle on the base (1).
• Insert the power plug into the mains socket.
• Press the On/Off button (11) «
». You will hear a
soundsignal,theaskillumination(2)willlightup,
the process of boiling will start. In the process of
heatingtheaskillumination(2)willchangeitscolor.
• After water starts boiling you will hear sound signals,
theaskillumination(2)willgoout,thekettlewill
pass into standby mode (there is no indication).
• If it is necessary to switch the kettle off, press the On/
Off button (11) « » or remove the kettle from the
base (1).
• Remove the kettle from the base and carefully pour
out boiled water into a suitable bowl.
• Remember that there is boiling water inside the kettle
ask(3),alwaysholdthekettleonlybythehandle
(8), do not tilt the kettle sharply, in case of careless
use of the kettle you can get burns by hot water.
• Repeat the water boiling procedure several times.
• Hotwaterresultingfromtherstboilingsisnot
recommended to consume, you may use it for
domestic needs.
ATTENTION!
To avoid burns by hot steam, do not bend over the
spout (4).
USING THE ELECTRIC KETTLE
Place the kettle on a solid steady at and non-slip
non-metal surface away from heat sources as far as
possible from the edge of the surface.
WATER BOILING
• Tollthekettlewithwaterpressthelidopening
button (6) and open the lid (5).
• Fill the kettle with water not below the mark «MIN»
and not above the maximal mark «MAX».
• Close the lid (5) and put the full kettle on the base
(1).
• Insert the power plug into the mains socket.
• Press the On/Off button (11) «
». You will hear a
soundsignal,theaskillumination(2)willlightup,
the process of boiling will start. In the process of
heatingtheaskillumination(2)willchangeitscolor.
• After water starts boiling you will hear sound signals,
theaskillumination(2)willgoout,thekettlewill
pass into standby mode (there is no indication).
• Press the On/Off button (11) « » and hold it within
3seconds,youwillhearasoundsignal,theask
illumination (2) will light up red. After water starts
boiling, the kettle will maintain the water temperature
within 2 hours, the illumination (2) will be glowing red.
Water heating will switch on, if the water temperature
cools down to 85°.

Содержание

Похожие устройства

Скачать