Buffalo LS-X1.0TL-EU [105/211] Ups settings

Using your LinkStation

LinkStation User Manual 104

UPS Settings

A UPS (uninterruptable power supply) can automatically shut down your LinkStation in case of a

power outage. To use the LinkStation with a UPS, congure the following settings.

Note: Not all LinkStations support UPSs. Check the LinkStation Function List on page 35 to see if

your LinkStation supports UPSs.

Plug the Power cable of UPS to a wall socket.

Connect the AC adapter of the LinkStation to the UPS.

Connect the UPS and the LinkStation with a USB cable.

Turn on the UPS, then the LinkStation.

In Settings, navigate to System - Power Management -

UPS Settings and click Modify Settings.

The LinkStation is now congured to work with the UPS.

Note: If the LinkStation shuts down automatically due to a power outage, make sure that the power

issue is resolved before turning it back on. If the LinkStation is turned back on while it’s still

running on the UPS battery, the UPS will not shut it down again, even if the battery runs low.

Power Management

1 If your LinkStation is connected directly to the

UPS, select synchronize with UPS connected to this

LinkStation. To have the UPS shut down multiple

LinkStations on the same network, select synchronize

with UPS connected to other LinkStation on the network

and enter the IP address of the LinkStation that is

connected directly to the UPS in the eld below.

2 Click Save.