Tefal X-Force Flex 8.60 Aqua TY9690WO, как новый [7/0] Problems with your appliance

Tefal X-Force Flex 8.60 Aqua TY9690WO [7/56] Problems with your appliance
5
PROBLEMS WITH YOUR APPLIANCE ?
Depending on model :
PROBLEMS POSSIBLE CAUSES SOLUTIONS
The charger becomes hot.
This is perfectly normal. The vacuum
cleaner can remain permanently
connected to the charger without
any risk.
The charger is connected but your
appliance is not charging.
The charger is not properly connected
to the appliance or is faulty.
Check that the charger is properly
connected or contact an Approved
Services Centre to change the charger.
Your appliance stops during operation
and the light/s flash very quickly.
Your appliance may be overheating.
Stop the appliance and leave cool for
at least 1 hour.
The appliance has stopped after the
charge light ashed.
The appliance has lost its charge. Recharge the vacuum cleaner.
The power-brush is not working
properly or makes a noise.
The rotating brush or hose are
obstructed.
Stop the vacuum and
clean the parts.
The brush is worn.
Contact an Approved Service Centre
to change the brush.
The belt is worn.
Contact an Approved Service Centre
to change the belt.
The power-brush stops during use of
the vacuum cleaner.
The heat safety device
has come on.
Stop the vacuum cleaner. Check that
nothing is obstructing the rotation of
the brush; if there is an obstruction,
remove it and clean the power-brush,
then turn on the vacuum cleaner.
Your vacuum cleaner suction is not
working properly or is making a
whistling noise.
The tube or hose is partially blocked. Unblock them the tube/hose.
The dust collector is full. Empty it and clean it.
The dust collector is not properly tted.
Re-position it correctly.
The suction head is dirty. Remove the power-brush and clean it.
The foam motor protection
lter is full.
Clean it.
When charging the vacuum cleaner,
the light(s) ash very quickly or the
red light is on.
The correct charger is not being used
or the charger is faulty.
Talk to an Approved Service Centre to
change the charger.
The red LED on the product ashes
during use
The suction head brush is blocked.
Stop vacuuming and check that there
is nothing blocking the rotation of the
brush.
The battery temperature is too high.
Leave the product to rest for 30minutes.
If the problem persists, replace the
battery.
The tube and/or suction head
connectors are dirty or damaged.
Clean the tube and suction head
connectors with a cloth.
The suction motor is not working.
Contact an Approved Service Centre to
have your appliance repaired.
Please keep this user manual.
EN

Содержание

Похожие устройства

Скачать