D-Link DMC-810SC [5/10] Nstallation

INSTALLATION

This chapter gives step-by-step installation instructions for

the Converter.

Selecting a Site for the Equipment

As with any electric device, you should place the equipment

where it will not be subjected to extreme temperatures,

humidity, or electromagnetic interference. Specifically, the

site you select should meet the following requirements:

1. The ambient temperature should be between 32 and

104 degrees Fahrenheit (0 to 40 degrees Celsius).

2. The relative humidity should be less than 90 percent,

non-condensing.

3. Surrounding electrical devices should not exceed the

electromagnetic field (RFC) standards for IEC 801-3,

Level 2 (3V/M) field strength.

4. Make sure that the equipment receives adequate

ventilation. Do not block the ventilation holes on each

side of the switch or the fan exhaust port on the side or

rear of the equipment.

5. The power outlet should be within 1.8 meters of the

switch.

Connecting to Power

1. This Converter is a plug-and-play device.

2. Connect the supplied AC to DC power adaptor with a

power voltage of 7.5Vdc/1.5Amp to the DC-Jack on

the converter, and then attach the plug into a standard

AC outlet.

Installing in a Chassis

The Converter can be fit into any of the expansion slots on a

special designed chassis.