Denzel AG230-2400 Руководство по эксплуатации онлайн [11/32] 664237

ANGLE GRINDER

At the end of the work:

•

disconnect the tool from the mains, making sure the switch is in the «o»;

•

clean the Angle Grinder and accessories from dirt.

Recommendations for use

Before you start processing a part, you must secure it, if it has a light weight.

For maximum grinding performance angle formed by the abrasive wheel and the surface to be treated should

be between 30 – 40 degrees. Move the machine smoothly along the surface to be treated. Thus, the overheat

and change of color of the processed surface is excluded, processing quality is improved.

ATTENTION!

Never use a cutting wheel for grinding.

When cutting with a cutting wheel do not put pressure on the handles of a power tool, tilt power tool. Avoid

vibration and tilting disc. It is necessary to work carefully, taking into account the characteristics of the material

being processed. It is very important to consider the direction of movement of the power tool. Power tools must

be moved against the rotation of the disc; otherwise, there is a risk of losing control of the power tool.

When cutting proles and rectangular pipes it is recommended to start cutting from the narrower end.

Do not overheat the exterior of the machine during prolonged use. If overheated, stop working, let the machine

work without load for 1 ... 2 minutes to cool the engine, turn o the engine and take a break to cool down

the gear housing.

Do not allow the machine to work when there is unwanted or unusual noise in the engine or mechanism. If noise

appears, turn o the machine and contact an authorized service.

NOISE AND VIBRATION

Noise and vibration characteristics are given in the table №1.

However, if the Angle Grinder will be used for other work with the use of working tools, not provided

by the manufacturer, or maintenance will not meet the requirements, then the vibration level may be dierent.

ATTENTION!

Always use personal ear protection.

MAINTENANCE

ATTENTION!

Before starting maintenance and adjustment of the Angle Grinder unplug the power cord from

the power outlet. To ensure quality and safe functioning keep your tool and vents clean at all times.

•

If you notice a decrease in the frequency of rotation of equipment or extraneous noise during operation,

it is necessary to hand over the device to the service center for its diagnosis and repair.

•

Working tool maintenance. The use of the worn working tool reduces the eectiveness of the work

and may result in motor or gearbox failure, it is therefore necessary to periodically replace worn out tooling

as soon as this becomes necessary.

•

Electric motor care. You must be especially careful with the electric motor, avoid getting liquids and foreign

objects inside the case. Keep your ventilation holes clean, blow them regularly with compressed air or clean

them with a brush. When noticeable sparks appear, contact an authorized service center for diagnostics

and possibly replacement of carbon brushes.