Vitek VT-4060 SR [7/60] English
![Vitek VT-4060 SR [7/60] English](/views2/1011787/page7/bg7.png)
ENGLISH
7
Connecting speaker cables
1. Peel off approximately 1/2 of cable insulation
2. Tighten the wire end (#2 below)
3. Open cable terminal by pressing back on tab
4. Insert wire end into terminal
5. Release tab; make sure wire is in terminal securely
Note: To prevent damage to the circuit, care should be taken
to prevent short circuiting from occurring at the positive and
negative poles of the speaker cord.
CONNECTING ANTENNA
Radio signals may be difficult to receive in some buildings and under
certain conditions. The provided antennas will help in their reception.
They are intended for indoor use only.
AM Loop Antenna
The placement of the AM loop antenna should be in a direction that
provides the clearest reception. Keep as far as possible from DVD
receiver, TV set, and speaker and power cords. If reception remains
poor, an outdoor antenna may be necessary.
To connect the AM loop antenna:
Hold down handle, then insert wire end into hole. Search the handle
position for best reception.
FM Indoor Antenna
The FM antenna should be fully extended and in a direction that provides
the clearest signal. Secure the antenna ends in a location where
distortion is a minimum. If reception remains poor, an outdoor antenna
may be necessary.
System setup
MENU OPERATION:
Press [SETUP] key for the screen to show the setup page. In setup
mode, press [SETUP] key again to quit the setup page. Press direction
key to the desired item, and press [ENTER] to confirm.
(1) Some setup items are concerning the present modes. The items in
gray can’t be set up.
(2) The setup is memorized and will be kept after the power has been
turned off.
System Setup
GENERAL SETUP PAGE
TV Display:
4:3 PANSCAN:
When the unit connects to the normal TV set, the widescreen image
shows on the full screen, but some part is cut off.
4:3 LETTERBOX:
When the unit connects to the normal TV set, the widescreen image
shows and black bars appear on the top and bottom of screen.
16:9:
Use this item when the unit is connected with the wide screen TV set.
WideSqueeze:
Use this item when the unit is connected to the widescreen TV set.
ANGLE MARK:
It will show the ANGLE mark when playing DVD disc with multiangle view
if selection is ON.
OSD LANG:
Select onscreen display language.
CLOSED CAPTIONS:
This function doesn’t work when the disc is without captions. If the
caption is OFF, press [SUBTITLE] key on the remote controller to turn the
captions on.
SCREEN SAVER:
If the SCREEN SAVER is set ON and the unit is switched on without a
disc playing for several minutes, a moving picture appears on the screen
and the unit will go to standby mode after 20 minutes. You can press the
[STANDBY] key on the remote controller to activate.
LAST MEMORY:
When this function is ON, the unit can memorize the time elapsed from
the last time you played the disc. When playing next time, it will resume
playing from D.R.C: The D.R.C can control data record. You can chose
AUTO, ON and OFF in this mode.
AUDIO SETUP PAGE
ANALOG AUDIO SETUP:
DOWNMIX:
LT/RT:
The audio out is Left and Right channel formatting even if the original
sound is 5.1CH format.
STEREO:
The audio out format is stereo even if the original sound is 5.1CH format.
3D SURROUND:
The audio out is virtual surround sounds (only for 5.1CH player).
OFF:
Turn off DOWNMIX function. If playing 5.1CH discs or the unit is
connected with 5.1 channel amplifier, this item should be selected (only
for 5.1CH player).
FRONT, CENTER, REAR and SUBWOOFER SPEAKER: (No this
item in 2CH player)
If your speaker system includes the above speakers, you can set these
items according the real speaker status.
DIALOG:
The DIALOG mode is available, and you can press up and down direction
key to adjust it. (In the DOWNMIX mode, LT/RT or STEREO is selected).
D.R.C:
The D.R.C can control data record. You can chose AUTO, ON and OFF in
this mode.
4060.indd 74060.indd 7 23.10.2006 9:25:1223.10.2006 9:25:12
Содержание
- Dvd 5 home theatre system model vt 4060 sr 1
- Instruction manual 1
- Class 1 laser product 2
- English 2
- English 3
- English 4
- English 5
- English 6
- English 7
- English 8
- English 9
- English 10
- English 11
- English 12
- Deutsch 13
- Deutsch 14
- Deutsch 15
- Deutsch 16
- Deutsch 17
- Deutsch 18
- Deutsch 19
- Deutsch 20
- Deutsch 21
- Deutsch 22
- Deutsch 23
- Deutsch 24
- Class 1 laser product 25
- Инструкция по эксплуатации vt 4060sr домашний кинотеатр 25
- Русский 25
- Русский 26
- Русский 27
- Русский 28
- Русский 29
- Русский 30
- Русский 31
- Русский 32
- Русский 33
- Русский 34
- Русский 35
- Русский 36
- Caution 37
- Class 1 laser product 37
- Інструкція з експлуатації vt 4060sr dvd 5 домашній кінотеатр 37
- Україньский 37
- Україньский 38
- Україньский 39
- Україньский 40
- Україньский 41
- Україньский 42
- Україньский 43
- Україньский 44
- Україньский 45
- Україньский 46
- Україньский 47
- Україньский 48
- Class 1 laser product 49
- Пайдалану нұсқау vt 4060sr dvd 5 үй кинотеатры 49
- Қазақ 49
- Қазақ 50
- Қазақ 51
- Қазақ 52
- Қазақ 53
- Қазақ 54
- Қазақ 55
- Қазақ 56
- Қазақ 57
- Қазақ 58
- Қазақ 59
Похожие устройства
- Jscar -800 Инструкция по эксплуатации
- Hertz HP 4 Инструкция по эксплуатации
- Casio EX-Z800 Blue Инструкция по эксплуатации
- Champion LMH5637BS Инструкция по эксплуатации
- Maxwell MW-1006 Инструкция по эксплуатации
- Vitek VT-4052 Инструкция по эксплуатации
- Tc Electronic G-FORCE Инструкция по эксплуатации
- Hertz HP 2 Инструкция по эксплуатации
- Casio EX-Z800 Black Инструкция по эксплуатации
- Maxwell MW-1003 Инструкция по эксплуатации
- Champion LM5126BS Инструкция по эксплуатации
- Toshiba SD-63HK Инструкция по эксплуатации
- Hertz HP 1 D Инструкция по эксплуатации
- Gree Bee Plasma GWH24ND-K3NNB3B Инструкция по эксплуатации
- Tc Electronic G-MAJOR Инструкция по эксплуатации
- Casio EX-ZS5 Black Инструкция по эксплуатации
- Mega 4120 XAS Инструкция по эксплуатации
- Maxwell MW-1012 Инструкция по эксплуатации
- Toshiba SD-57HTKR Инструкция по эксплуатации
- Hertz HP 1 KD Инструкция по эксплуатации
Скачать
Случайные обсуждения