Hanns.g HW223DP [14/22] Control panel button functions

User’s Manual

CONTROL PANEL BUTTON FUNCTIONS

 Power Button:

Press this button to switch ON/OFF of monitor’s power.

 Power Indicator:

Green — Power On mode.

Orange — Power Saving mode.

 MENU / ENTER:

1. Activates the OSD menu or confirms adjustments to settings.

2. Exit OSD volume display when in volume OSD status.

 Volume ◄/►:

1. Activate the volume control when the OSD is OFF.

2. Navigate through adjustment icons when OSD is ON or adjust a function when

function is activated.

 i Button:

1. Press this button for less than 1.5 sec. to activate the Auto Adjustment function in

Analog mode. (The Auto Adjustment function is used to optimized the H-Position,

V-Position, Clock and Phase.)

2. Press this button for more than 1.5 sec. to change input source.

(Analog->Digital->YPbPr source)

NOTES:

 Do not install the monitor in a location near heat sources such as radiators or air dusts,

or in a place subject to direct sunlight, or excessive dust or mechanical vibration or

shock.

 Save the original shipping box and packing materials, as they will come in handy if you

ever have to ship your monitor.

 For maximum protection, repackage your monitor as it was originally packed at the

factory.

 To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains

may be removed with a cloth lightly dampened with a mild detergent solution. Never use

strong solvents such as thinner, benzene, or abrasive cleaners, since these will damage

the cabinet. As a safety precaution, always unplug the monitor before cleaning it.

 Function Key Lock:

Press the <「Volume -」, >「Volume +」 and the 「Menu」 buttons simultaneously to

enable the Function Key Lock. When the Function Key Lock is enabled, only the Power

button is active. Press the <「Volume -」, >「Volume +」 and the 「Menu」buttons

simultaneously again to unlock the function keys.