Alcatel ONE TOUCH T10 [3/20] Charging battery

Note: Pressing the Reset button will only turn off the device. To turn on the

device , user needs to press and hold the Power button.

Charging Battery

The device has a built-in rechargeable battery. No extra battery installation is required.

Just charge the device when it indicates low battery.

To charge the battery, connect the device to any standard wall outlet via the DC-IN

port using the power adaptor. It takes about 5 hours to fully charge the battery. When

the battery is fully charged, the charge indicator should light up in orange. During

charging, the indicator lights up in red.

Note:

a. You are strongly recommended to charge the battery immediately when the device indicates the battery

is lower than 15%!

b. For extended battery life, it is suggested NOT to use the device when it is charging.

c. For maximum performance, lithium-ion batteries need to be used often. If you don’t use the device

often, be sure to recharge the battery at least once per month.

d. Be sure to use only the dedicated power adaptor provided with the unit for charging.

Installing Memory Card

This device can read files directly from memory card.

To use a memory card, find the card slot on the device and then insert the memory

card into the slot in the correct orientation. To access the files stored in the memory

card, enter the Explorer mode by tapping the Explorer icon and select the “SD Card”

directory.

Transferring Files

Before reading or playing files, you may need to transfer media files from a computer

to the device.

(1) Connect the device to a computer with the supplied USB cable. Two removable

disks will be added to the computer, respectively referring to the internal flash

memory and the SD card.

(2) Once the connection is done, turn on the USB storage.

(3) Open a removable disk, then copy files from the PC to it.

Note:

Since pre-installed applications and Android OS occupies a considerable part of capacity – about 2.0GB, it

is normal that you see huge difference between available memory space and total capacity.

Turning On/Off

To turn on the device, press and hold the Power button on the unit until you see the

boot-up screen then release. It may take a few minutes to start up the system, please

wait before you proceed.