Stiga PARK UNLIMITED 14 [54/169] Patent design registra

Stiga PARK UNLIMITED 14 [54/169] Patent design registra
54
ENGLISH
EN
3. Remove the filter package (14:A+B). The pre-
filter is placed over the filter cartridge. Make
sure that no dirt gets into the carburettor.
4. Cover the intake duct with a cloth or similar
(14:D) so that no contaminants enter the engine.
Clean the filter housing internally.
5. Remove the pre-filter from the filter cartridge.
6. Clean the filter cartridge (paper filter) by tap-
ping it lightly against the flat surface and blow-
ing through from the inside out using
compressed air. See fig. 15. If the filter is very
dirty, replace it.
NOTE! The paper filter must not be rinsed
with water, petrol or other cleaning agents.
This will damage the filter.
7. Wash the pre-filter (plastic foam filter) in liquid
detergent and water. See fig. 16. Let it air dry. If
the filter is very dirty, change it.
NOTE! The plastic foam filter insert must
never be oiled.
8. Install the pre-filter on the filter cartridge.
9. Assemble in reverse order.
5.10 SPARK PLUG
The spark plug(s) must be replaced every 200
hours of operation (=at every other basic service).
Before disconnecting the spark plug, clean around
its mounting.
Spark plug: Champion RC12YC or equivalent.
Electrode distance: 0.75 mm.
5.11 AIR INTAKE
See 11:W. The engine is air-cooled. A blocked
cooling system can damage the engine. Clean the
engine’s air intake after 50 hours of operation.
More meticulous cleaning of the cooling system is
carried out during each basic service.
5.12 LUBRICATION
All lubrication points in accordance with the table
below must be lubricated every 50 hours of opera-
tion as well as after every wash.
5.13 FUSES
If any of the faults listed below occurs, replace the
relevant fuse. See fig. 20.
6 PATENT - DESIGN REGISTRA-
TION
This machine or parts thereof is covered by the fol-
lowing patent and design registration:
SE9901091-0, SE9901730-3, SE9401745-6,
US595 7497, FR772384, DE69520215.4,
GB772384, SE0301072-5, SE04/000239 (PCT),
SE0401554-1, SE0501599-5.
GGP reserves the right to make alterations to the
product without prior notification.
Object Action Fig-
ure
Centre
point
4 grease nipples.
Use a grease gun filled with uni-
versal grease. Pump until the
grease emerges.
17
Steering
chains
Brush the chains clean with a wire
brush.
Lubricate with universal chain
spray.
-
Tension-
ing arms
Lubricate the bearing points with
an oil can when each control is
activated.
Ideally carried out by two people.
18
Control
cables
Lubricate the cable ends with an
oil can when each control is acti-
vated.
Must be carried out by two people.
19
Fault Fuse
The engine does not start or starts and
stops immediately. The battery is
charged.
10 A
Electrical cutting height adjustment
do not work.
20 A
All electrical functions are out of
operation. The battery is charged.
30 A

Содержание

Скачать