BMW R1150RT ABS (2001) [3/96] Bmw annual service
![BMW R1150RT ABS (2001) [3/96] Bmw inspection every 20 000 km 12 000 miles](/views2/1121016/page3/bg3.png)
Order No. 01 71 0 029 614 UX-VS-2, 12.2000 Printed in Germany
Customer Registration No.
Order No. Mechanic’s signature
BMW Inspection
at 1,000 km
(600 miles)
BMW Service
10,000 km
(6,000 miles)
BMW Inspection
every 20,000 km
(12,000 miles)
BMW
Annual Service
Read the fault code memory with the BMW MoDiTeC
[Integral ABS] perform bleed test with BMW MoDiTeC
Change oil while at regular operating temperature and replace the oil filter element
If the motorcycle is ridden only for short distances or outside temperatures are below 0 °C: at the
latest every 3,000 km (1,800 miles)*
)
Change oil in gearbox while at operating temperature
every 2 years*
)
at the latest
every
2years
Change oil in rear wheel drive while at operating temperature
if necessary, clean inductive sensor on rear wheel
every 40,000 km (24,000 miles) or at the latest every 2 years*
)
40,000
every
2years
Replace fuel filter *
)
Normally every 40,000 km (24,000 miles), if fuel is of poor quality every 20,000 km (12,000 miles)
40,000
Check the battery fluid level, if necessary top up with distilled water
Clean and grease battery poles if necessary
Replace intake air filter element
In very dirty and dusty operating conditions, replace every 10,000 km (6,000 miles) or even more
frequently if necessary *
)
Replace Poly-V belt *
)
Replace the Poly-V belt every 60,000 km (36,000 miles); do not adjust it 60,000
Check brake fluid level at front and rear
Check operation of brake system and freedom from leaks; repair/replace items if necessary*
)
Examine brake pads and discs for wear, replace as necessary*
)
[Without ABS] change brake fluid every twelve months
[Integral ABS] change bake fluid in wheel circuit every 12 months
[Integral ABS] change brake fluid in control circuit every 2 years*
)
every
2years
[Integral ABS] perform bleed test with BMW MoDiTeC
Check clutch fluid level
Change the clutch fluid*
)
every 2 years at the latest
every
2years
Check tightness of rear wheel studs
Check rear wheel bearing play by tilting wheel
Check swinging arm bearings (freedom from play), adjust if necessary *
)
Grease the side stand pivot
Check function of side stand contact switch
Check condition of spark plugs
Replace spark plugs
Tighten cylinder head nuts
Check/adjust valve clearances
Check that the throttle cable moves freely and is free of kinks and chaffing, replace if necessary *
)
Check throttle-cable play
check synchronisation, repair leaks if necessary *
)
Final inspection with road safety and functional check:
– Condition of tyres and wheels, tyre pressures
– Lights and signalling equipment, telltale and warning lights, instruments,
– clutch, gearshift mechanism, hand brake and foot brake, steering,
– if necessary, test drive
*
)
Charged as an additional item
BMW Motorrad
Maintenance schedule
R 1100 S EVO / R 1150 R / R 1150 RT
Содержание
- Maintenance bmw integral abs 1
- Bmw annual service 3
- Bmw inspection at 1 000 km 600 miles 3
- Bmw inspection every 20 000 km 12 000 miles 3
- Bmw motorrad maintenance schedule r 1100 s evo r 1150 r r 1150 rt 3
- Bmw service 10 000 km 6 000 miles 3
- Bmw motorrad pre delivery check r 1100 s evo r 1150 r r 1150 rt 4
- Bmw motorrad service data r 1150 rt 5
- Item desired value unit of measure ment specification 5
- Brakes 6
- Clutch 6
- Contents 6
- Engine 6
- Engine electrics 6
- Equipment 6
- Exhaust system 6
- Front forks 6
- Fuel preparation and control 6
- Fuel tank and lines 6
- General electrical equipment 6
- Rear wheel drive 6
- Steering 6
- Table of operating fluids 6
- Tightening torque 6
- Tightening torque table of operating fluids 6
- Transmission 6
- Wheels and tyres 6
- Tightening torque 8
- Table of operating fluids 17
- Assembling cas 18
- Assembling the motorcycle 18
- Checking engine oil level when cold adding oil if necessar 18
- Checking headlight beam angle adjusting if necessary 18
- Checking that delivery is complet 18
- Checking the crated motorcycle for damage 18
- Checking tightness of rear wheel studs 18
- Checking tyre pressure 18
- Contents 18
- Filling and charging the batter 18
- Final cleanin 18
- Final inspection and function check 18
- General view of crated motorcycl 18
- Handing over the motorcycle 18
- In case of damage in german 18
- In case of damage in importer market 18
- Inspecting motorcycle for damage 18
- Installing cover for windscreen adjuster and installing windscree 18
- Installing front mudguar 18
- Installing mirror 18
- Installing the front whee 18
- Integral abs performing bleed test with bmw moditec 18
- Pre delivery check 18
- Unpacking the motorcycle 18
- General view of crated motorcycle 20
- Checking the crated motorcycle for damage 21
- In case of damage in germany 21
- In case of damage in importer markets 21
- Unpacking the motorcycle 21
- Assembling the motorcycle 22
- Installing front mudguard 22
- Installing the front wheel 22
- Filling and charging the battery 23
- Assembling case 25
- Installing cover for windscreen adjuster and installing windscreen 25
- Installing mirrors 25
- Checking engine oil level when cold adding oil if necessary 26
- Checking that delivery is complete 26
- Checking tightness of rear wheel studs 26
- Checking tyre pressures 26
- Inspecting motorcycle for damage 26
- Checking headlight beam angle adjusting if necessary 27
- Final cleaning 28
- Final inspection and function check 28
- Integral abs performing bleed test with bmw moditec 28
- Handing over the motorcycle 29
- Changing engine oil replacing oil filter element 30
- Changing oil in gearbox 30
- Changing the oil in the rear wheel drive 30
- Checking battery fluid level and topping up if necessary cleaning and greasing the battery post 30
- Checking brake fluid level 30
- Checking brake system for correct operation and freedom from leaks repairing replacing if necessar 30
- Contents 30
- Front brak 30
- Integral abs performing bleed test with bmw modite 30
- Key to maintenance interval 30
- Maintenance 30
- Reading the bmw moditec fault code memory 30
- Rear brak 30
- Replacing fuel filter 30
- Replacing intake air filter element 30
- Replacing poly v bel 30
- Bleeding changing brake fluid in front control circui 31
- Bleeding changing brake fluid in front wheel circui 31
- Bleeding changing brake fluid in rear control circui 31
- Bleeding changing brake fluid in rear wheel circui 31
- Changing bleeding brake fluid in control circuit 31
- Changing bleeding brake fluid in wheel circui 31
- Changing the clutch fluid 31
- Checking brake disc wea 31
- Checking brake pads and discs for wear replacing 31
- Checking brake pads for wea 31
- Checking clutch operating fluid level 31
- Checking function of side stand contact switc 31
- Checking rear wheel bearing play by tilting whee 31
- Checking replacing spark plugs 31
- Checking swinging arm bearings adjusting if necessar 31
- Checking tightness of rear wheel studs 31
- Contents 31
- Greasing the side stand pivot 31
- Replacing brake pad 31
- Tightening cylinder heads 31
- Checking adjusting valve clearances 32
- Checking freedom of throttle cable checking for chaffing and kinks replacing if necessary checking throttle cable play checking and adjusting idle speed and throttle valve synchronisation 32
- Contents 32
- Final inspection with road safety and functional check 32
- Integral abs performing bleed test with bmw moditec 34
- Key to maintenance intervals 34
- Reading the bmw moditec fault code memory 34
- Changing engine oil replac ing oil filter element 35
- Changing oil in gearbox 36
- Changing the oil in the rear wheel drive 36
- Replacing fuel filter 37
- Checking battery fluid level and topping up if necessary clean ing and greasing the battery posts 39
- Replacing intake air filter element 40
- Replacing poly v belt 40
- Checking brake fluid level 41
- Checking brake system for correct operation and freedom from leaks repairing replacing if necessary 41
- Front brake 41
- Rear brake 41
- Checking brake pads and discs for wear replacing 42
- Checking brake pads for wear 42
- Checking brake disc wear 43
- Replacing brake pads 43
- Bleeding changing brake fluid in front wheel circuit 45
- Changing bleeding brake fluid in wheel circuit 45
- Bleeding changing brake fluid in rear wheel circuit 49
- Bleeding changing brake fluid in front control circuit 53
- Changing bleeding brake fluid in control circuit 53
- Bleeding changing brake fluid in rear control circuit 55
- Checking clutch operating fluid level 56
- Changing the clutch fluid 57
- Checking function of side stand contact switch 58
- Checking rear wheel bearing play by tilting wheel 58
- Checking swinging arm bearings adjusting if necessary 58
- Checking tightness of rear wheel studs 58
- Greasing the side stand pivot 58
- Checking replacing spark plugs 59
- Tightening cylinder heads 59
- Checking adjusting valve clearances 60
- Checking freedom of throttle cable checking for chaffing and kinks replacing if necessary checking throttle cable play checking and adjusting idle speed and throttle valve synchronisation 60
- Final inspection with road safety and functional check 62
- Assembling rear brake caliper 64
- Brakes 64
- Checking and adjusting blow by clearance of piston rod 64
- Checking and adjusting setting of rear brake light switch 64
- Contents 64
- Disassembling and assembling front brake caliper 64
- Disassembling and assembling rear brake caliper 64
- Disassembling rear brake caliper 64
- Installing integral abs pressure modulator 64
- Removing and installing footbrake lever 64
- Removing and installing front brake caliper 64
- Removing and installing front brake discs 64
- Removing and installing front integral abs sensor 64
- Removing and installing integral abs pressure modulator 64
- Removing and installing integral abs sensor 64
- Removing and installing piston in brake lever fitting 64
- Removing and installing rear brake caliper 64
- Removing and installing rear brake disc 64
- Removing and installing rear brake master cylinder 64
- Removing and installing rear integral abs sensor 64
- Removing integral abs pressure modulator 64
- Technical data 34 brake 64
- Contents 65
- Drain both wheel circuits 65
- Draining control circuits 65
- Draining the integral abs brake system 65
- Filling and bleeding control circuits 65
- Filling and bleeding integral abs system 65
- Filling and bleeding wheel circuits 65
- Installed position of front brake line 65
- Installed position of rear brake line 65
- Integral abs performing bleed test with bmw moditec 65
- Integral abs reading fault memory with bmw moditec 65
- Integral abs removing and installing bleed lines wheel circuit reservoirs 65
- Integral abs removing and installing brake lines 65
- Removing and installing front brake caliper 67
- Disassembling and assem bling front brake caliper 68
- Removing and installing rear brake caliper 69
- Assembling rear brake caliper 70
- Disassembling and assembling rear brake caliper 70
- Disassembling rear brake caliper 70
- Removing and installing front brake discs 71
- Removing and installing rear brake disc 71
- Removing and installing front integral abs sensor 72
- Removing and installing integral abs sensor 72
- Removing and installing rear integral abs sensor 73
- Removing and installing foot brake lever 74
- Removing and installing rear brake master cylinder 74
- Checking and adjusting blow by clear ance of piston rod 75
- Checking and adjusting setting of rear brake light switch 76
- Removing and installing piston in brake lever fitting 76
- Removing and installing inte gral abs pressure modulator 77
- Removing integral abs pressure mod ulator 77
- Installing integral abs pressure modu lator 78
- Drain both wheel circuits 79
- Draining the integral abs brake system 79
- Draining control circuits 81
- Filling and bleeding control circuits 82
- Filling and bleeding integral abs system 82
- Filling and bleeding wheel circuits 86
- Integral abs performing bleed test with bmw moditec 92
- Integral abs reading fault memory with bmw moditec 92
- Integral abs removing and installing bleed lines wheel circuit reservoirs 93
- Integral abs removing and install ing brake lines 94
- Installed position of front brake line 95
- Installed position of rear brake line 96
Похожие устройства
- Stiga SP 352 Инструкция по эксплуатации
- BMW R1150GS (2000) Инструкция по эксплуатации
- Stiga SP 355 Инструкция по эксплуатации
- BMW R1100S (1999) Инструкция по эксплуатации
- Stiga SP 380 Q Инструкция по эксплуатации
- BMW R1200C (1999) Инструкция по эксплуатации
- Stiga SP 382 Инструкция по эксплуатации
- BMW R850C (1999) Инструкция по эксплуатации
- Stiga SP 400 Инструкция по эксплуатации
- BMW R100R Инструкция по эксплуатации
- Stiga SP 400 Q Инструкция по эксплуатации
- BMW R80GS Инструкция по эксплуатации
- Stiga SP 420 Инструкция по эксплуатации
- BMW K1200RS Инструкция по эксплуатации
- Stiga SP 422 Инструкция по эксплуатации
- Stiga SP 440 Инструкция по эксплуатации
- BMW R850 1100R (2000) Инструкция по эксплуатации
- Stiga SP 442 Инструкция по эксплуатации
- BMW R850 1100GS (2000) Инструкция по эксплуатации
- Stiga SP 460 Инструкция по эксплуатации
Скачать
Случайные обсуждения