Home
Главная
Samsung
Цифровая Видеокамера
SCC-B2091P
Инструкция по эксплуатации Страница: 18

Samsung SCC-B2091P Инструкция по эксплуатации онлайн [18/168] 114920

1) SW1(L/L) :

Set to OFF, the camera activates the internal synchronization mode and set to ON, the power

synchronization mode. If you connect multi cameras to the sequential switcher to enter the

automatic conversion mode, the screen will bounce every screen while the camera stays in

INT(internal synchronization). Such bouncing phenomena may be cleared and screen conversion

becomes smooth by setting the L/L switch to ON and using the INT/DEC switch to control the

vertical synchronous phase.

❉

If you want to control the vertical synchronous phase with the INT/DEC switch when L/L is set

to ON, you shall set SW4 to AWB ON.

❉

In case of DC12V, INT(internal synchronizer) will be fixed without regard to ON/OFF of L/L.

❉

If you want to use the camera with PDP/LCD, please set the L/L switch OFF.

2) SW2(ELC) :

Use this switch with the Manual Iris Lens. While this switch is ON, the speed of the electronic

shutter varies with the brightness of the subject from 1/60(50) to 1/100,000 sec for automatically

controlling the brightness of the screen. However, with the Auto Iris Lens (DC or Video Control),

be sure to switch OFF.

Color Rolling may occur in this mode. In that case, input AC power source to the camera and

select SW1 "ON".

(NTSC : 60HZ, PAL : 50HZ)

3) SW3(FL):

This is to prevent flicker on the screen when NTSC system is used in 50HZ power supply region

and PAL system is used in 60HZ power supply region. That is to prevent shaking on the

screen resulted from the discordance of the vertical sync frequency and the flicker frequency of

the illumination. While this switch is ON, the electronic shutter is fixed to 1/100sec (NTSC) or

1/120 sec (PAL).

4) SW4(AWB):

When setting up ON, the color of screen is adjusted automatically in accordance with the change

of lighting color temperature by the change of outer environment. (ATW) If the lighting condition is

steady, OFF setting is available. The camera memorizes the lighting color temperature at the

time when the switch setting is changed from ON to OFF, and the camera color is adjusted to the

memorized color temperature. (AWC) If the lighting color temperature is changed and you want

to make the camera be memorized/operated with the changed color temperature, re-operate the

switch On/Off operation. However, be aware that an error may occur under the following

conditions.

First, a case that the subject is big, single color of the high chroma, and in the center of

the screen or a case with almost no white color on the screen.

Second, a case with a specific illumination such as a natrium lamp

Содержание

Похожие устройства

1 SW1 L L Set to OFF the camera activates the internal synchronization mode and set to ON the power synchronization mode If you connect multi cameras to the sequential switcher to enter the H automatic conversion mode the screen will bounce every screen while the camera stays in INT intemal synchronization Such bouncing phenomena may be cleared and screen conversion becomes smooth by setting the L Lswitoh to ON and using the INT DEC switch to control the vertical synchronous phase If you want to control the vertical synchronou s phase with the INT DEC switch when b L is set to ON you shall set SW4 to AWB ON Incased DC 12V INT internal synchronizer will be fixed without regard to ONOFF of L L If you want to use the camera with PDP LCD please set the LL switch OFF 2 SW2 ELC Use thisswitoh with the Manual Iris Lens While this switch is ON the speed of the electronic shutter varies with the brightness of the subject from 160 50 to 1 100 000 sec forautomaiically controlling the brightness of the screen However with the Auto Iris Lens DC a Video Control be sure to switch OFF Color Rolling may occur in this mode In hatease input AC power source to the camera and select SW1W NTSC MHZ PAL 50HZ 3 SW3 FL This is to prevent licker on the screen when NTSC system is used in 50HZ power supply region and PAL system is used in 60HZpower supply region Thal is to prevent shaking on the screen resulted from the discordance of the vertical sync frequency and the flicker frequency of the illumination While this switch is ON the electronic shutter is fixed to 1 1 OOsec NTSC or 1 120 sec PAL 4 SW4 AWB When setting up ON the color of screen is adjusted automatically in accordance with the change of lighting color temperature by the change of outer environment ATW If the lighting condition is steady OFFsetfng is available The camera memorizes the lighting color temperature at the time when the switch setting is changed from ON to OFF and the camera color is adjusted to the memorized color temperature AWD If the lighting color temperature is changed and you want to make the camera be memorizedtoperated w th the changed color temperature reoperate the switch OnOff operation However be aware that an error may occur under the following conations First a case that the subject is big sing Ie co lor of the high chroma and in the center of the screen or a case with almost no white color on the screen Second a case with a specific illumination such as a natrium lamp fix