Moulinex ZU5008 [10/50] What to do if your appliance does not work

Make sure to clean the inside of the screw (C) carefully; if necessary, use the brush (P).

Clean the residue exit (K) with a lightly moist and non-abrasive sponge.

The pusher (A), the feed tube (B), the bowl (G), the screw (C), the juice collector (H) with

the spout with drip-stop (I), the jugs (N), and the foam separator (O) can all go into the

dishwasher. If the filters (D/E) are clogged, prewash them with warm water and washing up

liquid and use the brush (P). If the filter residue exit is clogged, remove the residues using the

other end of the brush (P).

Do not clean the juice collector (H), the spout with drip-stop (I), the plastic parts (bowl (G),

food presser (A), feed tube (B)) with the abrasive side of the sponge.

Tips: To extract the screw (C) from the filter (D/E), turn both pieces together and then press

on the screw.

WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK

PROBLEMS SOLUTIONS

The appliance does not turn

- Make sure that all parts are correctly assembled.

- Make sure that your appliance is properly plugged in.

- Check that the feed tube (B) is correctly locked in

position.

The appliance stops suddenly

while functioning: the red

light flashes

- Press the Start/Stop button (M) to switch off the

appliance.

- Start your appliance again. If the safety mechanism

shuts the appliance off again, take it apart, clean it and

turn it on again.

- Make sure that the screw (C) is not blocked.

The appliance turns off: the

white light flashes

- This is a safety mechanism. We recommend that you let

the appliance cool down for a few minutes, clean it, and

then restart it by pressing the Start/Stop button (M).

Poor Juice Extraction - Clean the appliance: wash, rinse out and dry: the feed

tube (B), the pressing screw (C), the filter (D or E),

the residue strap (F), the bowl (G), the jugs, the spout

(H and I) and the dry residue colector (Q).

- Make sure that the strap (F) is correctly positioned on

the filter (to collect residues) and that it is in good

condition.

Problems related to leaking - Check that all parts are correctly assembled, especially

the spout with drip-stop (I).