Ada GROUNDDRILL-12 А00310 [8/34] Ground drill 12 ground drill 12

MEASUREMENT FOUNDATION

GroundDrill - 12

FUEL

1. Remove the fuel tank cap and check fuel lever. If necessary add some fuel.

2. Use only motor gasoline (with a minimum of 92 octane or unleaded or low leaded gasoline). Never use mixture of oil-fuel or sour

gasoline. Avoid getting dirt or water in the fuel tank.

STARTING ENGINE

1. Turn main switch to ON

2. Move choke lever to the position “4” for cold starts to block air ow to carburetor

3. Pump primer ball near the air lter several times

4. Grasp handle of pull start chord and pull quickly

5. Move choke lever to the position “2” when the engine warms.

6. Operation

1. Let engine warm for at least 1 min.

2. Press or release throttle lever to get desired rpms. If the engine reduce rpms on load,

adjust the position of throttle lever.

Important!

Do not work without workmate. Otherwise it can lead to the damages.

Avoid running at high rpms for long periods. The unit needs time for lubricant to get to

all internal parts.

Do not run the motor at high rpms without load.

Position of choke lever:

1. Stop

2. Idling

3. Fast

4. High rpm