Ada wall scanner [10/32] Wall scanner

MEASUREMENT FOUNDATION

WallScanner

ing value is indicated all over a larger range of the measuring indicator f, then the material is screening off electrically

and the scan for “live” wires/conductors is not reliable.

Wires that are not “live” can be found as metal object with the detecting-metal function. However, stranded cables are

not indicated (contrary to solid copper conductors).

Operating Instructions

On condition of the principle, the measuring values can be impaired through certain ambient conditions. These include,

e.g. the proximity of other equipment that produce strong magnetic or electromagnetic elds, moisture, metallic building

materials. Foil-laminated insulation materials or conductive wallpaper. Therefore, please also observe other information

sources (e.g. construction plans) before drilling, sawing or routing into walls, ceilings or oors.

SWITCHING OFF THE SIGNAL TONE

The signal tone can be switched on and off. For this, press the metal-detection button 5 and the wood-detection button 4

at the same time. When the signal tone is switched off, the switched-off audio signal indicator j appears on the display.

The signal tone setting is maintained after switching the measuring tool off and on again.

“AUTOCAL ”CALIBRATION INDICATOR

When the check mark behind the “Autocal” calibration indicator g ashes over a longer period or if it is not displayed

anymore, reliable scanning is no longer possible. In this case, send the measuring tool to an authorized agent. Exception:

in the detecting wooden object function, the “Autocal ” calibration indicator g goes out as long as the “ZOOM” button

3 is not pressed.