Ada wall scanner [6/32] Wall scanner

MEASUREMENT FOUNDATION

WallScanner

INITIAL OPERATION

Protect the measuring tool against moisture and direct sun irradiation.

SWITCHING ON AND OFF

Before switching the measuring tool on , make sure that the sensor area 8 is not moist . If required , wipe the measuring

tool dirty using a cloth. If the measuring tool was subject to an extreme temperature change, allow it to the adjust to the

ambient temperature before switching on.

To switch on the instrument press any button.

When switching the measuring tool on with the wood-detection button 4 or with the metal-detection button 5, it will

automatically be in the respective detection function.

When switching the measuring tool on with the “on/off”button 6 or with the “ZOOM” button 3, it will be the detection

function last used.

After self-check, the measuring tool is ready for operation. When the measuring tool is in the metal-detection function,

the service readiness is indicated through a check mark behind the “Autocal” calibration indicator g.

To switch the measuring tool off, press the “on/off” button 6.

If none of the measuring tool buttons are pressed for approx. 5 minutes, the measuring tool switches off automatically

in order to extend the service life of the battery.

Operating Modes

The measuring tool detects objects below the sensor area 8.