Electrolux ZSC2540CS [12/17] English

English

CLEANING THE HOSE AND NOZZLE

The vacuum cleaner loses suction if the nozzle, tube, hose or

filters and s-bag® becomes blocked. In such cases, disconnect

from mains and allow to cool for 20-30 minutes. Clear

blockage and/or replace filters and s-bag® and restart.

Tubes and hoses

1 Use a cleaning strip or similar to clear the tubes and hose.

2 Hose handle can be dismantled from hose if cleaning is

needed.

3 It may also be possible to remove the obstruction in the

hose by squeezing it. However, be careful in case the

obstruction is caused by glass or needles caught inside

the hose.

Note: The warranty does not cover any damage to the hose

caused by cleaning it.

Cleaning the floor nozzle

4 Be sure to frequently clean the combination floor nozzle.

Remove dust-balls, hair or other objects that may be

entangled. Larger objects can be accessed by removing the

connection tube from the nozzle.

Cleaning the turbo nozzle

(certain models only)

5 Disconnect the nozzle from the vacuum cleaner tube and

remove entangled threads, etc. by snipping them away

with scissors. Use the hose handle to clean the nozzle.