Magio MG-321 [18/23] Страница 18
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Magio MG-321 [18/23] Страница 18

Magio MG-321 [18/23] Страница 18
ASSEMBLY OF THE STEAMER
1: Pick the unit out of the package, then
check and be sure all the parts are
available.
2: Fully extend the telescopic pole, to do so
first open the clips and loosen the poles,
and then fully extend the pole, at last close
the clips on the pole and to lock the poles
as shown (figure 2). Make sure that the
pole is securely locked into place and
cannot be pushed down.
NOTE: The Telescopic Pole must be fully
extending during steamer operation to
insure a free flow of steam through the
Hose.
3: To attach the hanger attachment, align
tabs in plastic hanger with grooves on pole
and push down (Figure 3).
4: Insert the bottom of the telescopic pole
into the pole base (see Figure 4) in such a
way so that the steam nozzle holder faces
the rear of the steamer.
5: Screw the telescopic pole nut clockwise
and tighten it. Telescopic pole must be
holding tightly in the pole base.
Connecting the hose:
6: To attach the steam hose align the hose
nut with the hose base, and then turn the
hose nut clockwise to tighten the hose
with unit (figure 5).
Tighten the hose handy, do not allow
excessive forces.
CAUTION: To prevent steam from
causing injuries or damage to surfaces,
always hang the Steam Nozzle on the
Steam Nozzle Holder when not in use.
Do not lay the Hose on the floor as
condensation
may occur, causing unwanted water
droplets in the steam.
CAUTION: Pulling on the Hose with
excessive force will damage the
hose, resulting in a steam leakage.

Содержание

Похожие устройства

Скачать