Magio MG-321 [21/23] Problem cause solution

PROBLEM SOLVING GUIDE

PROBLEM CAUSE SOLUTION

Steamer is not plugged in. Plug into electrical outlet.

The unit fails to steam.

The light on the On/Off

Switch does not

illuminate.

Household Circuit

Breaker/Ground Fault

Interrupter is tripped or

Fuse is blown.

Reset the Circuit Breaker/Ground

Fault Interrupter, or replace the fuse. If

You need assistance, contact a

qualified electrician.

Mineral buildup in the unit.

Follow the Removing Mineral

Buildup Procedure in this manual.

The unit fails to steam.

The light on the On/Off

Switch does illuminate.

The Water Tank is empty.

Refill the Water Fill Tank using the

procedures in this manual.

Water drips from nozzle Condensation in hose

Extend the hose vertically to allow

water to drain back into the Water

Reservoir.

Excessive gurgling of

Hose and Steam

Nozzle

Condensation in hose

Some gurgling is a natural effect of the

steaming process. For excessive

gurgling, extend the hose vertically to

allow water to drain back into the

Water Reservoir.

Steam is intermittent Mineral Buildup in the unit

It is normal for the unit to periodically

stop steaming for a few seconds. If the

steam stays off for longer periods,

follow the Removing Mineral Buildup

Procedure in this manual.