Magio MG-321 [20/23] Страница 20
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Magio MG-321 [20/23] Страница 20

Magio MG-321 [20/23] Страница 20
PRESSING WITH STEAM
1. To steam a garment, place it on a clean,
rust-free clothes hanger, and place the
hanger on the Clothes Hanger Hook. For
horizontal steam mode place the clothing
on a clean, flat surface.
CAUTION: Be careful when handling
garments on the Clothes Hanger Hook.
Pulling on the garment with too much
force may cause damages.
CAUTION: Hot Steam may come out
from the small holes when steaming.
2. Grasp the Handle, and place the Steam
Nozzle at the bottom of the garment.
Steam will rise along the inside and
outside of the fabric, removing wrinkles.
Slowly slide the nozzle vertically, from the
bottom to the top of the garment.
NOTE: Do not allow kinks to form in the
hose at any time.
3. Remove the nozzle from the garment,
and smooth the fabric with your
free hand.
4. Repeat steps 2 and 3 as necessary until
the fabric is wrinkle free.
5. Using horizontally keep steam 4 inches
above clothing.
6. Heavier fabrics may require repeated
steaming.
7. To remove stubborn wrinkles, steam
both sides of the fabric.
8. The Fabric Brush may also be used to
remove tough wrinkles.
QUICK STORAGE
1. Turn switch to "OFF".
2. Unplug the Power Cord.
3. Wrap the Hose around the Telescopic
Pole one time as shown on the cover of
manual.
4. Hang the Steam Nozzle from the Steam
Nozzle Holder.
5. Loosen the top two of the Telescopic
Pole by turning them counter-clockwise.
6. Push down on the Pole Top; the pole will
collapse to a compact height.
7. Roll the unit to a convenient storage
location.
CLEANING AND LONG TERM STORAGE
We recommend you follow this
procedure at least once per week. Use of
distilled or de-mineralized water
reduces the need to for cleaning and
prolongs the life of your steamer.
1. Please switch the knob to the 1 level
(“OFF”).
2. Unplug the unit from the power outlet.
3. Wait for the unit to cool completely (at
least 30 minutes).
4. Remove the Hose and the Telescopic
Pole.
5. Carry the unit to a sink or tub.
6. Remove and drain the Water Fill Tank.
Rinse the water tank with fresh
water, and drain completely.
7. Drain the steamer and emptying the
contents into the sink or tub. Tilt or
upside down the unit to facilitate removal
of the water.
8. Flush the unit by filling the Water
Reservoir and the Hose Base with fresh
water and drain completely.
9. Place the Water Fill Tank back on the
Water Reservoir.
10. Reattach the Telescopic Pole and Hose.
11. Follow steps 3-7 of the Quick Storage
procedure above.

Содержание

Похожие устройства

Скачать