Kramer VM-73 [11/14] Reading the edid from pc out 1

8 VM-73 - Connecting the VM-73

5.1 Reading the EDID

The VM-73 PC input directly reads the EDID from the PC OUT 1 output (see

Section

5.1.1), and allows the HDMI input to read the EDID of the HDMI outputs

(see Section 5.1.2

5.1.1 Reading the EDID from PC OUT 1

The EDID information of the output connected to PC OUT 1 goes directly to the

PC input via pins 12 and 15 of the 15-pin HD connectors.

5.1.2 Reading the EDID from the HDMI Outputs

The EDID is always acquired from the highest priority output (OUT 1 being the

highest and OUT 3 the lowest).

For example, if all three outputs are connected, the EDID will be read from OUT 1. If OUT 2

and OUT 3 are connected, the EDID will be read from OUT 2.

You can acquire the EDID by disconnecting (for 2 seconds) and then reconnecting

the HDMI input.

To read the EDID (from OUT 2, for example), do the following:

1. Connect an acceptor to OUT 2 (OUT 3 can also be connected, but

OUT 1 cannot).

2. Turn ON the POWER.

3. Disconnect the input for 2 seconds and then reconnect it.

The input reads the OUT 2 EDID information.

If you connect OUT 1, the EDID still remains that of OUT 2.

To acquire the default EDID, disconnect all the HDMI outputs, disconnect the

HDMI input for 2 seconds and then reconnect it.