Kramer 690R [9/13] Connecting the 690t and the 690r

6 690T, 690R - Connecting the 690T and the 690R

4 Connecting the 690T and the 690R

Always switch off the power to any device before connecting it to your

690T and/or 690R. After connecting your 690T and/or 690R connect

the power and then switch on the power to the device.

To connect the 690T and the 690R as illustrated in the example in

Figure 3:

1. Connect up to two SDI sources (for example, 3G-SDI video players) to the

two SDI I

N connectors.

2. Connect the two SDI O

UT connectors to up to two SDI acceptors (for

example, 3G-SDI displays).

The SDI 1 IN source signal on the 690T is always routed to the SDI

1 OUT acceptor on the 690R and the SDI 2 IN source signal on the

690T is always passed to the SDI 2 OUT acceptor on the 690R

3. Remove the dust caps and connect the OPTIC CABLE connector of the

690T to the OPTIC CABLE connector of the 690R, via dual single mode

cable (9/12) over LC connectors (a maximum range of 10km (more than 6.2

miles)).

4. Connect the power adapter to the 5V DC socket and to the mains electricity

for both the 690T and the 690R (not shown in

Figure 3).